Forklift moving a pallet of boxed motors through the JWMotor factory warehouse

OEM · ODM · Neutral labeling · Factory direct

OEM Electric Motors

Three-phase IEC motors built to your specification by the factory that makes them. Our R&D team adapts mounting, voltage, frequency, shaft, sealing and thermal protection, proves the design on a single engineering sample, then builds the batch with every motor tested.

16,000 m²Manufacturing area, catalog
80,000Units a year, catalog output capacity
1 sampleEngineering sample before the batch
100%Of motors tested, one report each

What you can specify

Start from a standard JWMotor series and change only what your machine or market needs. Everything below is on our customization and service pages.

Mounting

IEC positions B3, B5, B35 and V1, plus B14, B34, V3 and V5. Custom dimensions on request. See B3, B5 and B35.

Voltage and frequency

Electrical specification matched to your regional grid. The catalog lists 50 Hz and 60 Hz and voltages from 380 to 690 V, including dual ratings. Building for a 60 Hz market? Say so up front.

Shaft

Machined to your drawing, whatever the diameter or length, or a double shaft (DE and NDE) for a second load, a brake or an encoder.

Sealing

IP55 and IP65 are standard for our three-phase asynchronous motors. Where dust or water calls for more, we work out a sealing solution for the real conditions.

Thermal protection

PTC thermistors, PT100 sensors or bimetallic switches, built into the winding to suit your control system.

Materials and insulation

99.99% enameled copper wire and Tier-1 bearings (SKF, NSK, C&U). Class F insulation as standard; Class H for harsh environments.

Labels and packaging

Neutral labeling and custom shockproof crating. For local brands, parameters and packaging can be tailored to build your own product line.

Efficiency class

IE2 (Y2), IE3 (YE3) and IE4 (YE4) general-purpose series, classified to IEC 60034-30-1. Tell us the efficiency rule in your market.

How an OEM project runs

Eight steps, as set out on our service page. No sales intermediaries: you talk to the people who build the motor.

StepWhat happensWhat you get
01 ConsultationDirect contact with engineers who know your industryResponse within 24 hours
02 Technical verificationNon-standard needs, from custom shafts to unusual voltages, checked before we quoteA match confirmed before the price
03 Solution and quoteFlat structure, no long approval loopsQuote in under 12 hours, no quotation cost
04 PrototypingSingle engineering sample (Bulk & OEM orders)Performance verified before mass production
05 Sourcing99.99% enameled copper wire, SKF / NSK / C&U bearingsClass H available
06 ManufacturingVacuum impregnation and in-house machiningCustom shafts made on site
07 Testing100% inspection, no random sampling: 10 tests per motorOne data sheet per motor
08 LogisticsCustom shockproof crating, neutral labeling for drop shippingPacked for safe, on-time arrival

We do not publish a minimum order quantity or standard lead times. Quantity, sample timing and delivery for your project are confirmed in writing with the quote. Our About page describes prototyping in as little as 7 days; how long your sample takes depends on what changes.

Two workers assembling blue three-phase motors on a roller conveyor in a motor factory

What every batch goes through

The same checks on motor one and motor one thousand. Details are on our quality page.

01

Incoming material

99.99% oxygen-free copper and high-grade silicon steel. No inspection-free intake.

02

Winding balance

Resistance corrected to a 20 °C baseline, unbalance held under 1%.

03

Insulation and inter-turn

IR and PI values, then high-voltage pulses to find hidden enamel damage.

04

Hi-pot

Applied voltage of 2× rated + 1000 V.

05

Vibration

Multi-axis measurement per ISO 10816-3 on every unit.

06

One motor, one report

Resistance, hi-pot and vibration data on a sheet that ships with each motor.

Start from a catalog series

Most OEM motors are a standard series with a few changes. Pick the closest one and tell us the difference.

Blue three-phase motors strapped on a pallet inside a wooden shipping crate

Base series for OEM builds

JWMotor catalog series

Y2 (IE2), YE3 (IE3) and YE4 (IE4) general-purpose motors in grey cast iron frames; RFKS motors for R, F, K and S gear reducers; YD and YDT pole-changing multi-speed motors; YVF2 variable-frequency motors; YEJ electromagnetic brake motors.

IEC 60072 mounting dimensions · Class F · IP55 · S1 duty · 1-year warranty

Series pages: RFKS · YD · YDT · YVF2 · YEJ

Who we build for

Machinery builders

Complete power solutions for pumps, fans and lifts, with full technical support.

Distributors

Cost-effective motors and flexible logistics, including neutral labeling for drop shipping.

Local brands

Customizable parameters and packaging, to build an exclusive product for your market.

Industry pages: Water and wastewater · HVAC and ventilation · Material handling

Start an OEM inquiry

Send what you have. A nameplate photo and a drawing are often enough to begin.

  • The motor you use now (nameplate photo), or kW, poles and frame
  • Supply voltage and frequency in the market you sell into
  • Mounting position and any dimension or shaft drawing
  • Protection, thermal sensors and insulation class
  • Labeling and packaging you need
  • Sample quantity and expected yearly volume
Start an OEM inquiry

Jiangxi Jiawang Special Motor · +86 199 0684 4761 · [email protected] · 1-year warranty on all products

OEM questions

Do you make OEM and private-label motors?

Our customization offer is OEM/ODM. Neutral labeling and custom packaging are part of our service. Tell us what you need on the motor and the carton, and we confirm in the quote what we can do.

What is the minimum order quantity?

We do not publish a fixed MOQ. Single-sample prototyping is available for bulk and OEM orders. Send your expected volume and the quote states the terms.

How long does a sample take?

Our About page describes prototyping in as little as 7 days. The real time depends on what changes from the standard motor, and is confirmed in writing with the quote.

Which certifications does the factory hold?

CE certification, and the national CCC certification since 2009. Efficiency classes IE2, IE3 and IE4 follow IEC 60034-30-1. Ask for the documents your market needs when you inquire.

How is each motor tested?

Every motor is inspected, with no random sampling, and ships with its own data sheet covering resistance, hi-pot and vibration. See the quality page.

What warranty applies?

1 year on all products.