IM B3 · Foot mounted · IEC 60072
B3 Foot Mounted Motors
B3 is the plain foot-mounted motor: feet on the frame, shaft horizontal, bolted to a baseplate or any flat surface. It drives through a coupling or a belt. Our catalog lists B3 for frames 80 to 400, with mounting dimensions to IEC 60072.
B3 next to B5, B35 and V1
The four standard mounting types in our catalog. B3 is the one without a flange.
| Code | How it mounts | Frames | Typical use |
|---|---|---|---|
| B3 | Feet on the frame, horizontal, bolted to a baseplate | 80–400 | Stable installation on flat surfaces |
| B5 | Large flange with through-holes, no feet | 80–280 | Close coupling, such as pumps |
| B35 | Feet plus a B5 flange | 80–400 | Dual support |
| V1 | Flange, vertical, shaft pointing down | 80–355 | Outdoors, often with a rain canopy |
Other foot-mounted positions in the catalog: B6, B7, B8, V5 and V6 for frames 80–160, and B34 (feet plus B14 face) for frames 80–112. Codes follow GB/T 997.
B3 foot dimensions by frame
H is the shaft centre height. A is the foot-hole spacing across the motor, B along it, C from the shaft shoulder to the nearest foot holes.
| Frame | H | A | B | C |
|---|---|---|---|---|
| 80 | 80 | 125 | 100 | 50 |
| 90S | 90 | 140 | 100 | 56 |
| 90L | 90 | 140 | 125 | 56 |
| 100L | 100 | 160 | 140 | 63 |
| 112M | 112 | 190* | 140 | 70 |
| 132S | 132 | 216 | 140 | 89 |
| 132M | 132 | 216 | 178 | 89 |
| 160M | 160 | 254 | 210 | 108 |
| 160L | 160 | 254 | 254 | 108 |
| 180M | 180 | 279 | 241 | 121 |
| 180L | 180 | 279 | 279 | 121 |
| 200L | 200 | 318 | 305 | 133 |
| 225S | 225 | 356 | 286 | 149 |
| 225M | 225 | 356 | 311 | 149 |
| 250M | 250 | 406 | 349 | 168 |
| 280S | 280 | 457 | 368 | 190 |
| 280M | 280 | 457 | 419 | 190 |
| 315S | 315 | 508 | 406 | 216 |
| 315M | 315 | 508 | 457 | 216 |
| 355L | 355 | 610 | 630 | 254 |
| 400M | 400 | 686 | 630 | 280 |
From the YE3/YE4 foot-mounted dimension table, catalog page 26. *Frame 112M: page 26 prints A = 180, the B35 table on page 28 prints 190. Confirm on the drawing. Catalog values in mm. Confirm every dimension on the drawing for your order before machining a base, flange or coupling.

When B3 is the right choice
If the motor sits on a base and nothing bolts to its face, B3 is the simple answer.
01
Base-mounted drives
Motor and driven machine on one baseplate, joined by a coupling.
02
Belt drives
The motor stands on its feet and drives through pulleys.
03
Replacing an IEC foot motor
YE3 follows IEC 60072-1: shaft height and foot pattern match a standard frame such as 132M or 160L.
04
Large frames
B3 runs to frame 400. A flange-only B5 stops at 280.
A foot-mounted series to start from
Our general-purpose motors come foot-mounted as standard. YE3 is the IE3 choice.

IE3 · Drop-in IEC frame
YE3 Series
Premium-efficiency three-phase induction motor, built as a drop-in for standard IEC metric frames. Shaft heights, foot mounting patterns and flange dimensions follow IEC 60072-1, so the baseplate stays.
0.18–630 kW · Frames 80–400 · 2 to 10 poles · IE3 · IP55
Where B3 motors go
Pumps and fans
Base-mounted pumps and fans driven through a coupling.
Compressors and machine tools
Machines with a motor on a base or a slide.
Conveyors
Conveyor drives on a frame or a baseplate.
Industry pages: Water and wastewater · HVAC and ventilation · Material handling
Ask for a B3 motor
Tell us the frame, or the motor it replaces.
- Frame size, or kW and poles
- Mounting: B3, or another foot position (B6, B7, B8, V5, V6)
- Your existing foot dimensions if the base is already drilled
- Supply voltage and frequency
- Efficiency class: IE2, IE3 or IE4
- Quantity
Jiangxi Jiawang Special Motor · +86 199 0684 4761 · [email protected] · 1-year warranty on all products
B3 questions
What does B3 mean?
B3 is the IM code for a foot-mounted motor with a horizontal shaft. The frame has feet for mounting on a baseplate or flat surface, and there is no flange.
Which frame sizes are available in B3?
Frames 80 to 400 in our catalog. The B3 table above lists H, A, B and C for each.
What is the difference between B3 and B35?
B35 adds a B5 flange at the drive end, so the motor can stand on its feet and bolt to the machine. See B35 motors.
Will a JWMotor B3 motor fit my existing baseplate?
If your current motor is a standard IEC frame, the YE3 lines up with the bolt-hole spacing and shaft centre height of that frame. Send the old nameplate and we confirm.
Can I mount a foot motor on a wall or ceiling?
The catalog lists B6, B7, B8, V5 and V6 foot positions for frames 80 to 160. Tell us the position when you order.
