YE3 · IE3 · Premium efficiency
IE3 motors
IE3 motors from the YE3 series. Premium efficiency to IEC 60034-30-1, IP55, and an IEC frame drop-in for conveyors, compressors and processing.
The IE3 line
YE3 is the premium-efficiency three-phase induction motor. The class is IE3, to IEC 60034-30-1.
01
IE3 premium efficiency
Fewer losses than an IE2 motor, from the materials and the design. The series meets MEPS in the EU, South America and Asia.
02
IP55
IP55 protection is standard on the YE3 series.
03
W470/W600 and copper
W470/W600 cold-rolled silicon steel and 100% copper windings.
04
Class F at a Class B rise
Class F insulation, 155°C, assessed at a Class B rise of 80K. That reserve covers the voltage spikes of a frequency converter. Class H is available for hotter rooms. High altitude needs a power derating.
Same shaft height on the existing base
Shaft centre height, foot pattern and flange follow IEC 60072-1. The base and the coupling stay when the frame is a standard IEC frame.
- IEC 60072-1 shaft height, feet and flange
- Frames such as 132M and 160L
- Siemens, ABB and WEG IE1 motors on a standard IEC frame

YE3 series
One catalog line. The product page carries the model designation and the grid.

IE3 · Premium efficiency · IP55
YE3
W470/W600 silicon steel and 100% copper windings. IEC 60072-1 drop-in for mines, conveyors, compressors, plastics and general processing.
Where YE3 is used
The series page names mines, conveyors, compressors, plastics and general processing.
Mines
Cast iron, for high torque and dust.
Conveyors
Three-phase conveyor drives.
Compressors
Compressors, plastics and general processing.
Quote from the nameplate
Send the frame you need to match, or the plate of the motor on the base.
- Frame, such as 132M or 160L
- kW
- Voltage and frequency
- Poles
- Foot or flange mounting
- IE3
YE3 can run on a frequency converter. Cables over 50 m, or voltage over 500 V, need a filter. Mounting and regional supply sit on customization. Send the plate through contact.
Questions before the order
What is an IE3 motor here?
YE3. A premium-efficiency three-phase induction motor to IEC 60034-30-1, with IP55, W470/W600 silicon steel and 100% copper windings. The series page states fewer losses than an IE2 motor, through the materials and the design. It meets MEPS in the EU, South America and Asia.
Will it fit the existing base?
YE3 follows IEC 60072-1 for shaft centre height, foot pattern and flange. A standard IEC frame such as 132M or 160L lines up with the bolt spacing. The series page names Siemens, ABB and WEG IE1 motors when that frame is standard.
What site conditions does the series page state?
IP55. Class F insulation at 155°C, assessed at a Class B rise of 80K. Class H is available for hotter rooms. High altitude needs a power derating. A frequency converter is acceptable. Cables over 50 m, or voltage over 500 V, need a filter. The same cast-iron housing is used for high torque and dust in mines.
