Cast-iron motors with red end shields moving along a roller conveyor in the JWMotor plant

Conveyors · Gear drives · Hoists · Start-stop duty

Material Handling Motors

Conveyors, lifts and automated lines ask a motor to start under load, stop many times an hour and sometimes hold a load still. This page sorts the job by motion: steady running, geared drive, stop and hold, and variable speed, with the JWMotor series for each.

RFKSIE3 motors for R, F, K and S reducers
YEJPower-off electromagnetic brake
YVF2Constant torque 5–50 Hz on a converter
B5 · B14Flanges for direct gearbox mounting

Sort the drive by motion

Our material handling page names YE3, YVF2 and RFKS; our YEJ pages add braking for hoists and conveyors. Ranges are from the catalog performance tables at 380 V 50 Hz.

MotionSeriesCatalog rangeWhat to confirm
Steady running through a separate gearboxYE3 (IE3)0.18–630 kW, frames 80–400Flange B5 or face B14 to suit the gearbox input; shaft and spigot to its drawing
Geared drive on an R, F, K or S reducerRFKS (IE3)0.18–630 kW, frames 80–400Reducer family and size; the catalog names automated lines, conveyors and packaging. We make the motor, not the reducer
Stop and hold: hoists, inclines, indexingYEJ brake motor0.75–45 kW, frames 80–225Braking time is in the catalog; braking torque is not published and is confirmed for your load
Speed changes or soft starts on a converterYVF2 inverter duty0.18–375 kW, frames 80–355Constant torque 5–50 Hz for conveyors and hoisting; separate cooling fan for low speed

For a complete motor-and-reducer drive explained, see gearmotors. Our material handling page also mentions an MS-series aluminum housing; MS motors are not in our catalog tables, so they are not covered here.

What handling duty asks, and what we state

From our material handling page, our YEJ and YVF2 pages and the catalog.

Frequent starts and stops

Our material handling page describes reinforced insulation for the heat of rapid switching. The YEJ catalog intro adds heat-resistant windings for repeated starting. Class F (155 °C) with VPI as standard.

Direct gearbox mounting

Our material handling page: IEC B5 and B14 flanges with precise shafts, made to fit worm, helical and planetary gearboxes without adapters.

Tight spaces

Our material handling page states the terminal box can be turned in 90° steps to suit the conveyor layout. Tell us the position you need.

Holding a load

YEJ motors have a power-off DC brake: when power is lost, springs lock the rotor. A manual release lever lets the shaft turn during maintenance; braking torque is set on the pressure springs.

Braking time

Catalog YEJ tables: at most 0.20 s on frame 80, rising to at most 0.45 s on frames 200–225, at 1.5× rated load.

Lifting equipment

The machine builder sets the safety rating of a hoist. We supply the motor to the load, speed and duty data you give us.

Blue motor and gear reducer at the head end of a belt conveyor carrying cartons in a warehouse

What we need for a conveyor or hoist motor

The load decides the motor. With these details we propose the series and confirm the model.

01

Load and speed

Belt speed or lifting speed, and the load at start.

02

Starts per hour

How often it starts and stops, and whether it must hold the load.

03

Reducer

Make, family and size, or the input flange and shaft drawing.

04

Mounting and box position

B5, B14 or B3; where the terminal box must face.

05

Control

Direct on line, two speeds, or a converter.

06

Supply and environment

Voltage, frequency, dust or wash-down, temperature.

Stop and hold

When the load must not run on after power is cut.

Blue brake motor with a manual release lever driving a wire-rope drum on a steel winch frame

Electromagnetic brake motor

YEJ Series

YEJ: 0.75–45 kW, frames 80–225, with an integrated power-off DC brake, manual release lever and spring-set braking torque. Catalog braking time at 1.5× rated load from 0.20 s (frame 80) to 0.45 s (frames 200–225).

IP55 · Class F · 380 V 50 Hz catalog data · 1-year warranty

Geared drives: RFKS series · gearmotors · helical gear motors. Speed control: VFD motors.

Where they run

Conveying and packaging lines

At Jiangxi Runtian Water Plant, 40 JWMotor three-phase motors run the conveying, packaging and ventilation lines.

Hoisting equipment

Our contact page lists hoisting equipment among the uses of our motors; YEJ brake motors hold the load when power is lost.

Automated lines

The catalog names automated lines, conveyors and packaging systems for RFKS motors on gear reducers.

More on our projects page.

Quote a handling motor

Send the load and the motion. We reply with the series, the model and the data sheet.

  • What the motor drives: conveyor, hoist, lift table, turntable
  • Load, speed and starts per hour
  • Whether it must brake and hold
  • Reducer make and size, or the input drawing
  • Control: direct, two speeds or converter
  • Voltage, frequency and quantity
Quote a handling motor

Jiangxi Jiawang Special Motor · +86 199 0684 4761 · [email protected] · 1-year warranty on all products

Material handling motor questions

What braking torque do YEJ motors have?

Our catalog lists braking time per model, not braking torque. Torque is set on the pressure springs in the brake. Tell us the load and we confirm the brake for it in the quote.

Do you supply the gear reducer?

We make the motor. RFKS motors are built to fit R, F, K and S reducer families, and our other motors come with B5 or B14 flanges for direct gearbox mounting.

Which motor for a conveyor that starts often?

For a geared conveyor, an RFKS motor on the reducer; if it must stop and hold, a YEJ brake motor; if the speed changes, YVF2 on a converter. Send the starts per hour and we confirm.

Can the terminal box face a different way?

Our material handling page states the box can be turned in 90° steps. Say which position you need in your inquiry.

Are your motors rated for cranes?

We do not publish crane or hoist duty classes. The equipment maker sets the duty and safety rating; we match the motor to the duty data you send.

Can I release the brake by hand?

Yes. YEJ motors have a manual release lever so the shaft can be turned during a power outage, maintenance or commissioning.