Flange-mounted motors with red terminal boxes stacked on a pallet in the workshop

DC coil · spring-applied · power-off

Electromagnetic brake motors

An electromagnet holds the brake open. Springs close it. When power is on, the DC coil pulls the armature clear and the shaft turns. When power goes, the coil lets go and the springs clamp the rotor. That is why the brake still works in a power failure. JWMotor builds these motors as the YEJ series, 0.75–45 kW.

DC coilReleases the brake while powered
SpringsApply the brake when power drops
RectifierIn the terminal box, AC in
0.2–0.5 mmAir gap to keep
Gloved hands with a feeler gauge at the closed brake cover and release lever of a blue brake motor

Inside the brake

The brake sits at the non-drive end, under a closed cover. Four parts do the work.

01

Coil and rectifier

The coil is a DC electromagnet. The AC/DC rectifier in the terminal box feeds it from the motor’s ordinary AC supply. No separate DC cabinet.

02

Armature and springs

Energized, the coil pulls the armature disc against the springs and the brake opens. De-energized, the springs push the disc back.

03

Friction lining

The disc presses on the friction lining and the rotor stops and is held. Brake torque is set on the pressure springs.

04

Manual release

A lever lifts the brake by hand during an outage, maintenance or commissioning, so the shaft can be turned.

Power-off, not power-on

Electromagnetic brakes come in two kinds. The difference is what happens when the supply fails. For lifting and emergency stops, that is the question that matters.

Power-off brake (YEJ)Power-on brake
Coil energizedBrake released, shaft freeBrake applied
Coil de-energizedSprings apply the brakeBrake released
Supply failsShaft locks. A lifted load stays put.Shaft is free
Holds at rest without powerYesNo

YEJ uses the power-off design: losing the supply applies the brake. Lifted loads do not free-fall and conveyors do not run on.

Wiring and upkeep

05

Coil voltage

The catalog lists a brake exciting voltage for every YEJ model. Send your supply and control voltage with the inquiry, and we confirm the coil for your model.

06

On a frequency converter

Tell us at the quote stage. The brake coil should not be fed from the converter’s variable output, and the release has to be timed with the drive ramp.

07

Keep the air gap

Keep the gap between 0.2 mm and 0.5 mm. As the lining wears the gap opens, and the stop gets longer. Check it at maintenance and reset it.

08

How fast it stops

The YEJ catalog gives a maximum braking time for every model, from 0.20 s on frame 80 to 0.45 s on frames 200 and 225, at its 1.5× rated test condition. Load inertia and the spring setting decide the stop on your machine.

Choosing by frame, power and braking time? The full frame-by-frame table is on brake motors.

Buying brake motors from the factory

Most inquiries are one of two things: a replacement for a motor already in service, or a motor for a machine still on the drawing board.

Replacement

Send the old nameplate. A model code such as YEJ132M-4 gives the series, frame, core length and poles. The replacement starts from the same frame.

OEM machines

Send the drawing and the duty. Custom shafts, double shaft extensions, non-standard voltage and frequency, and thermal protection with PTC thermistors, PT100 sensors or bimetallic switches are offered.

Mounting

B3, B5, B35 or V1. The factory also builds B14, B34, V3 and V5.

Testing and samples

The company states 100% performance testing and 7-day rapid prototyping before mass production.

More on options: Customization · About JWMotor

The YEJ series

YEJ is the JWMotor electromagnetic brake motor. One series, 50 catalog models.

Blue brake motor with a closed brake cover driving a winch drum with wire rope

Electromagnetic brake · three-phase

YEJ Series Brake Motors

Three-phase induction motor with a spring-applied DC electromagnetic brake. Power-off design, rectifier in the terminal box, manual release lever, brake torque set on the springs. Catalog rows are IP55 with Class F insulation.

0.75–45 kW · 2 · 4 · 6 · 8 poles · Frames 80–225 · 220–690 V

Where the brake earns its place

Holding a load

Hoists and other vertical lifting, where the load has to stay put when the power fails.

Stopping on the mark

Assembly lines, stacker cranes and packaging machines that index and stop without overshoot.

Ending run-on

Conveyors, warehousing and machines that must not keep moving after the stop button.

Industry pages: Material handling · Manufacturing · Woodworking

Ask for a brake motor quote

Send what you have. A nameplate photo and a line about the machine is a good start.

  • Kilowatts, poles and frame, or the old model code
  • Supply voltage and frequency, and the control voltage
  • Holding a vertical load, or stopping horizontal motion
  • Starts and stops per hour
  • Direct-on-line, soft starter or frequency converter
  • Quantity, and whether it is a replacement or a new machine
Request a quote

Jiangxi Jiawang Special Motor · +86 199 0684 4761 · [email protected]

Before the quote

What is an electromagnetic brake motor?

A three-phase motor with an electromagnetic brake built onto its non-drive end. On YEJ the brake is spring-applied and released by a DC coil, so it locks the shaft whenever the power is off.

Why does an AC motor have a DC brake coil?

The brake is a DC electromagnet. The rectifier in the terminal box converts the motor’s AC supply to DC for the coil, so no separate DC supply or cabinet is needed.

Is it fail-safe in a power cut?

Yes. YEJ is a power-off design. When the supply is lost, the springs apply the brake and the shaft is held. Lifted loads do not free-fall.

How do I release the brake without power?

Use the manual release lever. It frees the shaft so it can be turned by hand during an outage, maintenance or commissioning.

What maintenance does the brake need?

Check the air gap and keep it between 0.2 mm and 0.5 mm. The lining wears and the gap opens over time. Brake torque is adjusted on the pressure springs.

Where do I pick the frame and stopping time?

On the brake motors page, which lists every YEJ frame from 80 to 225 with its power range, poles and catalog braking time.

Do you supply OEM and replacement orders?

Yes. Send the nameplate or the drawing, the duty and the quantity. Mounting, shaft, voltage and thermal protection can be matched to the machine.