Motor + gear reducer · R · F · K · S · IE3
Gearmotors
A gearmotor is an electric motor and a gear reducer working as one drive. The motor sets the power and the input speed. The reducer brings the speed down and the torque up. JWMotor’s RFKS motors are built to go straight into R, F, K and S reducers, 0.18–630 kW in IEC frames 80–400, to IE3.
What a gearmotor is
Two parts, one job. The split matters when you choose, specify or repair one.
The motor
Three-phase asynchronous. Its power and pole count fix the kilowatts and the speed going into the gearbox.
The reducer
Lowers the speed and multiplies the torque by its ratio. The family decides where the output shaft points.
The joint
On RFKS the motor shaft enters the gearbox and works as the first-stage pinion. No coupling and no lantern adapter.
The seal
An oil seal chamber in the motor end shield with high-temperature FKM (Viton) seals keeps gearbox oil where it belongs.
Four families, one motor range
The gearbox family decides the output. One RFKS range covers the input of all four.
| Family | Gear type | Output | From the product page |
|---|---|---|---|
| R | Helical | In line with the motor | Part of the modular R/F/K/S range |
| F | Parallel shaft | Parallel to the motor, offset | Part of the modular R/F/K/S range |
| K | Helical-bevel | Right angle | Higher efficiency, up to 95% for the gearbox, longer life on heavy duty |
| S | Helical-worm | Right angle | More cost-effective, self-locking for simple conveyors |
The 95% is the efficiency of the K gearbox, not of the motor. Gearbox sizes and ratios are not listed here. They come from the gearbox you use. For the fit to SEW-style reducers, see SEW compatible gear motors.

When a gearmotor is the right drive
A plain motor turns too fast for most conveyors, mixers and hoists. A gearmotor brings the speed down in one compact unit.
01
Slow output
The machine shaft has to turn far slower than the motor. The reducer ratio gets it there.
02
Tight space
Against a standard motor plus flange adapter, the product page puts the RFKS axial length saving at 10–20%.
03
Heavy starts
Hoists and conveyors that start under load. The RFKS rotor slot profile is made for high starting torque.
04
Long hours at low speed
The catalog upgrades RFKS windings and bearings for low-speed, high-torque duty.
The motor side: RFKS series
One series for the input of R, F, K and S reducers. Full frame-by-frame data is on the series page.

Aluminum housing motor for gear reducers
RFKS Series Motors
Three-phase asynchronous motor for direct insertion into R, F, K and S gear reducers. Custom shaft extension, FKM oil seals in the end shield, rotor made for high starting torque. IE3 to IEC 60034-30-1.
0.18–630 kW · 2 · 4 · 6 · 8 · 10 poles · Frames 80–400 · IE3 · IP55
The modular design allows flange, foot or shaft mounting. Catalog performance is at 380 V, 50 Hz; rated voltage on the product page is 220–690 V. Browse the gear motors category.
Where it goes
Lines and packaging
Automated lines, conveyors, AGVs and packaging machines, where a shorter drive frees space.
Hoists and conveyors
Drives that start under load.
Farm and process
Grain handling, ventilation and feeding. Compressors, plastics and general processing.
Industry pages: Material handling · Agriculture · Manufacturing
Ask about a gearmotor
Tell us what the drive has to do, and what is already on the machine.
- Gearbox family, size and ratio, if you have one: R, F, K or S
- Or the output speed and torque the machine needs
- Kilowatts and poles, or the old motor nameplate
- Voltage and frequency
- Mounting position, including vertical V1 or V3
- Duty: heavy start, low speed, hours per day
Jiangxi Jiawang Special Motor · +86 199 0684 4761 · [email protected] · 1-year warranty on all products
Gearmotor questions
What is a gearmotor?
An electric motor and a gear reducer combined in one drive. The motor supplies power at its rated speed; the reducer lowers the speed and raises the torque by its ratio. Gearmotor, gear motor and geared motor mean the same thing.
Which reducer family do I need?
R (helical) keeps the output in line with the motor. F (parallel shaft) puts it parallel and offset. K (helical-bevel) and S (helical-worm) turn it through a right angle. K is the more efficient, up to 95% for the gearbox; S costs less and is self-locking.
What does JWMotor make for gearmotors?
The motor: the RFKS series, built for direct insertion into R, F, K and S reducers. Tell us the reducer you have or plan to use and we confirm the fit before quoting.
What power range is covered?
0.18–630 kW in IEC frames 80–400, with 2, 4, 6, 8 and 10 poles. The per-frame table is on the R/F/K/S series page.
Is it the same as an SEW gearmotor?
No. SEW and Nord are trademarks of their owners. JWMotor is not affiliated with them. RFKS follows international standard dimensions and, according to the product page, can replace many SEW-style or Nord-style units. We check the fit for your gearbox.
