Textile machinery · Inverter duty · Quote by machine duty
Textile Motors
Our contact page lists textile machinery among the uses of our motors, and our catalog names textiles for the YVF2 inverter-duty series. We do not publish textile-specific ratings, so this page is short and practical: which series to start from, and the machine data we need to confirm a motor.
What we can tell you now, and what we confirm with the quote
Everything in the left column is on our catalog or live pages. The right column is what we will not guess.
| Stated in our sources | Confirmed with the quote |
|---|---|
| YVF2 inverter-duty motors: the catalog names textiles, metallurgy and CNC as typical uses | The speed range and torque your machine needs at each speed |
| YVF2 constant torque from 5 to 50 Hz and constant power above 50 Hz; our YVF2 page names low-speed tension control and winding | Power and torque at low speed for your winding or tension duty |
| YVF2 independent axial cooling fan (IC416) keeps cooling at low speed | Whether the separate fan suits the lint and air in your machine room |
| Our manufacturing page: S1 continuous duty, Class F/H insulation with VPI, from “high-speed textiles to precision CNC units” | Duty cycle, starts per hour and the insulation class for your temperature |
| Fixed-speed drives: the series on our manufacturing page are Y2 (IE2), YE3 (IE3) and YE4 (IE4) | kW, poles, frame and mounting for each drive point on the machine |
| Catalog operating conditions: −15 °C to +40 °C, altitude up to 1000 m, average monthly peak relative humidity 90% | Any room condition outside those limits |
We do not publish textile-specific speeds, humidity or lint ratings. Ranges for each series are on the series pages: YVF2 · YE3 · YE4 · Y2.

The machine duty we ask for
A textile machine often has several drive points. Send these for each one.
01
Machine and drive point
Machine type, and which shaft the motor drives: main drive, winding, fan or pump.
02
Speed and control
Fixed speed, or speed range on a converter; the converter make if known.
03
Power and torque
Shaft power at full speed and torque at the lowest speed.
04
Duty
Continuous or start-stop; starts per hour.
05
Room
Temperature, humidity and lint in the air around the motor.
06
Fit
Mounting, shaft drawing, voltage and frequency.
The series the catalog names for textiles
For drives that change speed on a converter.

Inverter-duty motor
YVF2 Series
YVF2: 0.18–375 kW, frames 80–355, Class F in the catalog. Independent axial cooling fan (IC416). Constant torque 5–50 Hz and constant power above 50 Hz, up to 100 Hz on most models; lower on the largest frames.
IP55 · Class F · IC416 · 380 V 50 Hz catalog data · 1-year warranty
Fixed-speed drives: YE3 · YE4 · Y2. Non-standard fit: OEM electric motors · custom shaft motors.
How a textile inquiry runs
Reply
We reply to every inquiry within 24 hours, per our service page.
Technical check
Engineers check the machine duty before the quote, so the rating is confirmed, not guessed.
Quote and sample
A quote in under 12 hours once the data is complete, and a single engineering sample for bulk and OEM orders.
From our service page. Prototypes in as little as 7 days, per our About page; confirmed in writing for each order.
Send your machine duty
One line per drive point is enough to start.
- Machine type and the drive point
- Speed: fixed, or range on a converter
- Shaft power, and torque at low speed
- Duty: continuous or start-stop
- Room temperature, humidity and lint
- Mounting, voltage, frequency and quantity
Jiangxi Jiawang Special Motor · +86 199 0684 4761 · [email protected] · 1-year warranty on all products
Textile motor questions
Which JWMotor series is meant for textile machinery?
Our catalog names textiles for the YVF2 inverter-duty series. For fixed-speed drives, our manufacturing page points to Y2, YE3 and YE4. The model for your machine is confirmed with the quote.
Do you publish ratings for specific textile machines?
No. We do not publish speeds, torque, humidity or lint ratings for particular textile machines. Send the machine duty and we confirm what fits.
Do you make servo motors for industrial sewing machines?
Our catalog lists three-phase induction motors; it does not list sewing-machine servo motors. Our sewing machine servo guide explains how those motors differ.
Can the motor run at low speed for tension control?
YVF2 is built for that: constant torque from 5 to 50 Hz, with a separate cooling fan so cooling does not drop with speed.
Can you match a 60 Hz machine?
The catalog lists 50 Hz and 60 Hz as rated frequencies; its tables are 50 Hz data, so 60 Hz ratings are confirmed with the quote. See 60 Hz motors.
What warranty applies?
1 year on all products.
