Three-phase · Asynchronous
AC motors
Industrial three-phase AC motors. Y2, YE3 and YE4 are asynchronous, IE2 to IE4. The quote starts from the nameplate.
What the AC nameplate has to say
These motors run on a three-phase alternating-current supply. Pole count and supply frequency set the speed band. The plate is what the factory quotes from.

01
Three-phase asynchronous
Y2, YE3 and YE4 are three-phase asynchronous motors. YE3 and YE4 are rated under IEC 60034-30-1.
02
Voltage and frequency
Send the grid on the plate. Voltage and frequency for a regional supply are set on the customization page.
03
IE2, IE3 or IE4
Y2 is IE2, with high starting torque on S1 duty. YE3 has fewer losses than IE2. YE4 takes another 15–20% off IE3 losses and typically runs 10°C to 15°C cooler.
Three AC lines
The card is the series page. Efficiency and duty stay with the line that publishes them.

IE2 · S1
Y2
High starting torque. Pumps, fans, blowers, compressors and conveyors. IEC frames 63–355.

IE3 · IP55
YE3
Fewer losses than IE2. 100% copper windings. Mines, conveyors, compressors and plastics.

IE4
YE4
15–20% lower losses than IE3. Ventilation, dry packaging, conveyors and compressors. Check length and weight.
Duty on the series page
A fan is a Y2 duty. A compressor is named on YE3. Packaging in a dry hall is named on YE4.
Y2
Fans and blowers
Also pumps, compressors and conveyors. High starting torque, S1, frames 63–355.
YE3
Compressors
Also mines, conveyors, plastics and general processing. IP55, 100% copper windings.
YE4
Dry packaging
Also mixers, conveyors, grain handling and ventilation. Lower losses when the hours are long.
Quote from the AC plate
Send the supply and the frame. Mounting, voltage and frequency are on the customization page.
Request a quote- Voltage and frequency
- kW and poles
- Frame size and mounting
- IE2, IE3 or IE4
From the plate
What is an AC motor on this page?
A three-phase asynchronous motor on an alternating-current supply. The lines here are Y2, YE3 and YE4, from IE2 to IE4. YE3 and YE4 are rated under IEC 60034-30-1.
Which line for the duty?
Y2 when the load needs high starting torque on S1 duty: pumps, fans, blowers, compressors and conveyors. YE3 when the losses should drop below IE2, on mines, conveyors, compressors and plastics. YE4 when the hours are long: another 15–20% off IE3 losses. The YE4 page puts payback at 12 to 24 months above 6,000 hours a year, at a price typically 15% to 30% higher. Check length and weight on a tight base.
Can YE3 run from a frequency converter?
Yes. The YE3 page says it is compatible with a frequency converter. Cables over 50 m, or a voltage over 500 V, need a filter.
Articles
Understanding the Operation of AC Induction Motors: Principles and FunctionalityIntroduction to AC Induction Motors AC induction motors are the workhorses of modern industries, powering everything from manufacturing equipment to ... Read…
Understanding the Differences Between AC and DC MotorsUnderstanding AC and DC Motors At their core, AC (alternating current) and DC (direct current) motors differ primarily in how ... Read…
Methods for Reversing AC Motor DirectionUnderstanding AC Motor Reversal Reversing the direction of an AC motor is a practical adjustment often required in industrial applications, ... Read…
Testing Procedures for AC Motors Using a MultimeterUnderstanding AC Motor Testing Testing an AC motor is a critical step in ensuring its proper function and diagnosing potential ... Read…
