Motors on a JWMotor line, wrapped units on the middle shelf ready for dispatch

RFQ checklist · Documents · Quote · Inspection

Electrical Motors Suppliers

A good motor supplier answers with data, not only a price. Here is what to send with an inquiry, which documents to ask for, and how JWMotor handles each step from your first message to the packed motor.

24 hResponse time
< 12 hTo quote, once requirements are in
0Quotation cost
1 reportPer motor: resistance, hi-pot, vibration

What to put in your RFQ

The more of this you send, the faster and more exact the quote. A nameplate photo covers most of the first card.

Supply

Voltage and frequency on site. The catalog lists 380 to 690 V, dual ratings 220/380, 380/660 and 400/690 V, and 50 Hz or 60 Hz.

Mounting

B3, B5, B35 or V1, or B14, B34, V3, V5. Custom dimensions on request.

Environment

Standard conditions are −15 °C to +40 °C ambient and up to 1000 m. IP55 standard; IP65 or special sealing if the site needs it.

Efficiency and protection

IE2, IE3 or IE4. Thermal protection by PTC, PT100 or bimetallic switch. Class F standard, Class H for harsh duty.

Quantity and samples

Order quantity and expected yearly volume, and whether you need an engineering sample first.

Labels and packing

Neutral labeling, custom crating, or your own packaging requirements.

Documents to ask any supplier for

Ask every supplier for the same papers and compare like with like. This is what JWMotor sends or confirms.

DocumentWhy it mattersFrom JWMotor
Test data sheet per motorProves that unit, not just the type, was testedShips with each motor: resistance, hi-pot, vibration
Performance dataCurrent, efficiency, power factor, torque ratios, noise, weightCatalog tables by model, at 380 V 50 Hz; other ratings with the quote
Dimension drawingBase, flange, shaft and coupling fitCatalog B3, B5 and B35 tables; confirmed on the drawing for your order
CertificatesMarket accessCE; CCC since 2009
Material specificationWhat is inside: copper, steel, bearings, insulation99.99% copper, Baosteel 50W470 steel, SKF / NSK / C&U bearings, Class F
WarrantyWho repairs or replaces1 year on all products
Commercial termsMOQ, lead time, delivery terms and paymentNot published; stated in the written quotation

Our Terms & Conditions state that final technical details, pricing, lead times, testing scope and supply terms are confirmed separately in writing. We do not publish an MOQ, standard lead times, Incoterms or payment terms on this site.

Quality inspector with a clipboard testing a blue cast-iron motor on an inspection table

How we quote, sample and inspect

Four steps between your RFQ and an order, then the checks every motor passes. From our service and quality pages.

01

Response

Within 24 hours, from people who understand your industry, not a sales intermediary.

02

Technical verification

Non-standard needs, from custom shafts to unusual voltages, are checked before we quote.

03

Quote

Under 12 hours once we have your requirements, with no quotation cost.

04

Sample

A single engineering sample for bulk and OEM orders, to verify performance before mass production.

05

Inspection

100% inspection, no random sampling: resistance, IR and PI, inter-turn, no-load, locked rotor, hi-pot, vibration, speed.

06

Report

One data sheet per motor, shipped with it, for traceability.

Sample before you commit

For bulk and OEM orders, validate the design on one engineering sample at low cost before mass production.

Blue cast-iron sample motor on a workbench with a caliper and a sketch of the motor

Single sample prototyping

One engineering sample

Our About page describes prototyping in as little as 7 days. How long your sample takes depends on what changes from the standard motor, and is confirmed in writing with the quote.

Bulk & OEM orders · Performance verified first · Timing in the quote

Building a private-label range? See OEM electric motors. Buying for stock? See electric motors wholesale.

Who we supply

Factories

High-efficiency motors that run reliably and lower maintenance costs.

Machinery and procurement

Complete power solutions for pumps, fans and lifts, with full technical support.

Distributors and local brands

Cost-effective motors, flexible logistics, and customizable parameters and packaging.

From the “Who we serve” section of our service page.

Send an RFQ

Send what you have. A nameplate photo and a quantity are enough to start.

  • Nameplate photo, or kW, poles and frame
  • Voltage and frequency
  • Mounting and any drawings
  • Environment and protection
  • Quantity, sample need and yearly volume
  • Labeling and packing
Send an RFQ

Jiangxi Jiawang Special Motor · +86 199 0684 4761 · [email protected] · 1-year warranty on all products

Supplier questions

How fast do you respond and quote?

We respond within 24 hours, and quote in under 12 hours once we have your requirements. There is no quotation cost.

What is your minimum order quantity?

We do not publish a fixed MOQ. Single-sample prototyping is available for bulk and OEM orders. Send your expected volume and the quote states the terms.

What are your lead times?

We do not publish standard lead times. Prototyping can take as little as 7 days; production timing depends on series, rating and customization and is confirmed in writing.

Which Incoterms and payment terms do you offer?

They are not published on this site. Delivery and payment terms are agreed in the written quotation.

What testing documents come with the motors?

Every motor is tested, with no random sampling, and ships with its own data sheet: resistance, hi-pot and vibration.

Which bearings and materials do you use?

99.99% enameled copper wire, Baosteel 50W470 silicon steel and Tier-1 bearings from SKF, NSK or C&U. Class F insulation is standard and Class H is available.