Two large blue three-phase motors on a roller line in the factory hall, shafts toward the camera

Three-phase AC · 380 V 50 Hz catalog · IE3

AC gear motors

The motor in a JWMotor gear drive is a three-phase AC asynchronous motor: the RFKS series, made to go straight into R, F, K and S reducers. The catalog lists its performance at 380 V, 50 Hz; the product page gives a rated range of 220–690 V.

3-phaseAsynchronous, cage rotor
380 V · 50 HzCatalog performance
220–690 VRated range, product page
IE3IEC 60034-30-1

What AC means here

Three-phase induction. No brushes, no drive electronics needed to run at rated speed. This page covers three-phase AC only.

Runs on the mains

Connect it to a three-phase supply and it runs at its rated speed, set by the pole count and the supply frequency.

Speed set by poles

Synchronous speeds in the catalog are 3000, 1500, 1000, 750 and 600 r/min at 50 Hz, for 2 to 10 poles. The gearbox lowers it from there.

Efficiency is IE3

Premium efficiency to IEC 60034-30-1. On 4-pole models the catalog runs from 80.8% at 0.55 kW to 96.0% at 630 kW.

Protection as standard

Catalog rows are IP55 with Class F insulation. Class H is available for hot sites.

Catalog data, 4-pole examples

Rows from the RFKS tables. Current, speed and efficiency at rated load.

ModelPowerVoltageCurrentSpeedEfficiencyPower factor
RFKS 80M2-40.75 kW380 V1.8 A1435 r/min82.5%0.75
RFKS 112M-44 kW380 V8.4 A1450 r/min88.6%0.82
RFKS 132M-47.5 kW380 V15.0 A1470 r/min90.4%0.84
RFKS 225M-445 kW380 V84.4 A1485 r/min94.2%0.86
RFKS 280M-490 kW380 V163 A1490 r/min95.2%0.88
RFKS 4006-4630 kW660 V645 A1490 r/min96.0%0.89

The largest frame-400 ratings are listed at 660 V. Full power-by-frame data is on the R/F/K/S series page.

Blue three-phase gear motor on a steel base under a conveyor, power cable running from the terminal box along a cable tray

Match the motor to your supply

Most problems with an AC gear motor start at the terminal box, not the gearbox. Tell us the grid first.

01

Voltage and frequency

Catalog data is at 380 V, 50 Hz. Other supplies are a customization: send the voltage and frequency you run.

02

Starting

The rotor slot profile is made for high starting torque, for hoists and conveyors that start under load.

03

Thermal protection

PTC thermistors, PT100 sensors or bimetallic switches can be built into the winding as options.

04

Speed control

For a drive on a frequency converter, see the converter-duty range on our VFD motors page.

The RFKS series

Three-phase AC motors for the input of R, F, K and S reducers.

Blue parallel-shaft gear motor on a concrete plinth, the three-phase motor bolted directly to the gearbox

Aluminum housing motor for gear reducers

RFKS Series Motors

Three-phase asynchronous motor for direct insertion into R, F, K and S gear reducers. Custom shaft extension, FKM oil seals in the end shield, high starting torque. IE3 to IEC 60034-30-1.

0.18–630 kW · 2 · 4 · 6 · 8 · 10 poles · Frames 80–400 · IE3 · IP55

Ambient −15 °C to +40 °C, altitude up to 1,000 m with a power derating above that. Browse the gear motors category.

Where it goes

Conveyors and lines

Automated lines, conveyors, AGVs and packaging machines.

Hoists

Drives that start under load.

Farm and process

Grain handling, ventilation, feeding, compressors and plastics.

Industry pages: Material handling · Agriculture · Manufacturing

Tell us your supply

The supply decides the winding. The gearbox decides the fit.

  • Voltage and frequency
  • Kilowatts and poles, or the old motor nameplate
  • Gearbox family, size and ratio: R, F, K or S
  • Mounting position, including vertical V1 or V3
  • Starting: direct on line, star-delta or converter
  • Duty: heavy start, low speed, hours per day
Request a quote

Jiangxi Jiawang Special Motor · +86 199 0684 4761 · [email protected] · 1-year warranty on all products

AC gear motor questions

What is an AC gear motor?

A gear reducer driven by an AC motor. At JWMotor that motor is the three-phase asynchronous RFKS series, built to go straight into R, F, K and S reducers.

Which voltage and frequency?

The catalog lists performance at 380 V, 50 Hz, with the largest frame-400 ratings at 660 V. The product page gives a rated voltage range of 220–690 V. Other supplies are handled as a customization.

Do you make DC or servo gear motors?

This page covers three-phase AC only. The RFKS series in our catalog is a three-phase asynchronous motor.

Can it run on a frequency converter?

Tell us if the drive will be on a converter. For converter duty, see our VFD motors page, and we will advise on the motor for your gearbox.

How efficient is it?

IE3 to IEC 60034-30-1. On 4-pole models the catalog runs from 80.8% at 0.55 kW to 96.0% at 630 kW. Gearbox losses come on top of that.