Three-phase supply · IE2 to IE4
3 phase AC motor
Three-phase AC motors for a three-phase supply, IE2 to IE4. Send voltage, frequency, poles, kW and the frame.
Voltage, poles, frame
The supply is three-phase. Pole count and frequency set the speed band. The frame has to sit on the base you already have.

01
Voltage and frequency
Send the three-phase grid. YE3 publishes 220–690 V. Voltage and frequency for a regional supply are set on the customization page.
02
Poles and kW
Send the pole count and the kilowatts. YE3 publishes 0.75–630 kW. On a fixed supply, poles and frequency set the speed band.
03
Frame and mounting
Y2 frames run 63–355. YE3 frames run 80–400, including 132M and 160L. B3, B5, B35 and V1 are on the customization page. YE4 keeps the IEC centre height and shaft diameter, and can be slightly longer and heavier.
Three lines on a three-phase supply
The card opens the series page. Voltage and frame stay with the line that publishes them.

IE2 · frames 63–355
Y2
High starting torque, S1. Pumps, fans, blowers, compressors and conveyors.

IE3 · 220–690 V
YE3
0.75–630 kW, frames 80–400. IP55, 100% copper windings. Mines, conveyors, compressors and plastics.

IE4
YE4
15–20% lower losses than IE3. Ventilation, grain and dry packaging. Check length and weight.
Duty stays with the series
A pump is a Y2 duty. Plastics and general processing are named on YE3. Grain ventilation is named on YE4.
Y2 · frames 63–355
Pumps
Also fans, blowers, compressors and conveyors. High starting torque on S1 duty.
YE3 · 220–690 V
Processing
0.75–630 kW, frames 80–400. Also mines, conveyors, compressors and plastics. IP55.
YE4
Grain ventilation
Also feeding, mixers and packaging in dry areas. IEC centre height and shaft diameter. Check length and weight.
Quote the three-phase plate
Send the supply and the frame. Mounting, voltage and frequency are on the customization page.
Request a quote- Voltage and frequency
- Poles and kW
- Frame size and mounting
- IE2, IE3 or IE4
From the three-phase plate
What do you send for a 3 phase AC motor?
Voltage, frequency, poles, kW, frame, mounting, and whether the line is IE2, IE3 or IE4. Y2, YE3 and YE4 are three-phase asynchronous motors.
What voltage and frame does YE3 publish?
YE3 publishes 220–690 V, 0.75–630 kW, and IEC frames 80–400. Y2 publishes frames 63–355. YE4 follows IEC centre height and shaft diameter, and can be slightly longer and heavier.
Can YE3 run from a frequency converter on a three-phase supply?
Yes. The YE3 page says it is compatible with a frequency converter. Cables over 50 m, or a voltage over 500 V, need a filter.
Articles
Torque Speed Curve of an Induction Motor: How to Read ItWhat each point on an induction motor torque speed curve means, NEMA MG 1 minimum torques for Design A/B/C, IEC design N…
Motor Frame Size Chart: IEC & NEMA Dimensions ExplainedStandard IEC frame dimensions for frames 56–355 and NEMA dimensions for frames 48–449T, how to read shaft height from the frame number…
How to Calculate Motor Torque: Formula, Worked Examples and Starting vs Breakdown TorqueMotor torque is T = 9550 × P (kW) ÷ n (rpm), or 5252 × hp ÷ rpm in imperial units. This…
How to Calculate Full Load Current of a 3-Phase Motor: Formula, Worked Examples and Nameplate FLAUnderstanding Full Load Current in 3-Phase Motors Full load current (FLC) refers to the amount of electrical current a motor ... Read…
Drum Motors for Conveyors: Motorized Pulleys vs External Motor-and-Gearbox DrivesA drum motor, or motorized pulley, puts the motor and gearbox inside the conveyor drive pulley. See how that differs from an…
Oil Well Pump Motors: High-Slip Beam-Pump Drives vs General Pump Motors and ESPSurface motors on beam pumping units often need high slip and high starting torque, commonly as NEMA Design D. That duty is…
