Cast-iron TEFC three-phase motor in a factory

Y2 · YE3 · YE4

Three phase electric motors

Cast-iron three-phase induction motors in IE2, IE3 and IE4. IEC metric frames for pumps, fans, compressors and conveyors.

Which efficiency class

Pick from annual hours and the efficiency rule on the project. Poles stay as they are on the nameplate.

Y2 when first cost leads

Budget-sensitive builds, spare pumps and auxiliary fans, and sites whose rules still accept IE2. Lower purchase price than IE3 or IE4, with the same cast-iron TEFC construction.

YE3 for MEPS projects

The usual step when a tender asks for premium efficiency. Same IEC mounting intent as the IE2 motor it replaces, with lower losses in the iron and copper.

YE4 when the motor stays on

Continuous duty, where electricity is most of the lifecycle cost. On the YE4 series page, plants running high load above 6,000 hours a year are the case where the higher purchase price is discussed against energy saved.

What the three series share

Published on the Y2, YE3 and YE4 pages. Ratings for a specific kW still come from that series table.

Cast-iron housingGeneral-purpose frames from IE2 to IE4. Y2 uses HT200 iron for the frame and end shields.
IEC metric mountingShaft height, foot pattern and flange to IEC 60072-1. Y2 frames run 63–355.
TEFC and IP55Y2 is TEFC / IC411, IP55. YE3 is published IP55.
InsulationClass F, Class B temperature rise on Y2 and YE3. Class H is available on Y2, YE3 and YE4 for hotter rooms.
40°C and altitudeY2 is rated to 40°C ambient. Above the catalogue altitude, all three series require a power derating.
One-year warrantyListed JWMotor products, including these three series.

Where they are applied

The duties named on the series pages.

Motor coupled to an industrial pump

Pumps

Y2 is specified for continuous-duty pumps, including backup pumps where the purchase price matters.

Motor driving an industrial fan

Fans and ventilation

Industrial fans and blowers on Y2. YE4 is used on farm ventilation and feeding lines where the fan stays online.

Motor on a conveyor drive

Conveyors

Standard three-phase conveyor drives on Y2 and YE3. YE4 covers mixers, conveyors and packaging in dry production areas.

Motor on a compressor skid

Compressors

Y2 for heavy-duty compressors and harsh rooms. YE3 and YE4 for continuous compressor and general process duty.

Quote from the nameplate

A series page holds the kW grid. The quotation needs the plate, not a horsepower guess.

  • kW, poles or rated speed
  • Voltage and frequency
  • Frame size and mounting: B3 foot, B5 flange, or B35
  • IE2, IE3 or IE4

A drawing for shaft, voltage or mounting goes through customization.

Questions from replacement jobs

How do Y2, YE3 and YE4 differ?

All three are cast-iron three-phase induction motors on IEC frames. Y2 is IE2, aimed at first cost and S1 duty. YE3 is IE3 premium efficiency for MEPS projects, with lower losses than IE2. YE4 is IE4 super-premium efficiency, with lower losses again than IE3, for long annual hours.

Can this replace a Siemens, ABB or WEG IEC motor?

When the installed motor is a standard IEC frame with the same mounting and shaft, yes. Y2 is built to IEC 60034, IEC 60072-1 and DIN 42673, frames 63–355, and is documented as a drop-in for Siemens 1LA7 / 1LG4 and ABB M2BA. YE3 matches bolt spacing, shaft centre height and flange on frames such as 132M and 160L. YE4 follows the same IEC centre height and shaft diameter; confirm length and weight where the guard is tight.

Can YE3 run on a frequency converter?

Yes. YE3 uses Class F insulation and is published as suitable for variable-speed drives. For cables longer than 50 m, or supply above 500 V, ask engineering about a filter before you order.

Articles