Foot-mounted three-phase motors with cast feet on pallets in the JWMotor factory

IM B3 · Foot mounted · IEC 60072

B3 Foot Mounted Motors

B3 is the plain foot-mounted motor: feet on the frame, shaft horizontal, bolted to a baseplate or any flat surface. It drives through a coupling or a belt. Our catalog lists B3 for frames 80 to 400, with mounting dimensions to IEC 60072.

IM B3Feet, horizontal shaft
80–400Frames listed for B3
IEC 60072Mounting dimensions
BaseplateStable on flat surfaces

B3 next to B5, B35 and V1

The four standard mounting types in our catalog. B3 is the one without a flange.

CodeHow it mountsFramesTypical use
B3Feet on the frame, horizontal, bolted to a baseplate80–400Stable installation on flat surfaces
B5Large flange with through-holes, no feet80–280Close coupling, such as pumps
B35Feet plus a B5 flange80–400Dual support
V1Flange, vertical, shaft pointing down80–355Outdoors, often with a rain canopy

Other foot-mounted positions in the catalog: B6, B7, B8, V5 and V6 for frames 80–160, and B34 (feet plus B14 face) for frames 80–112. Codes follow GB/T 997.

B3 foot dimensions by frame

H is the shaft centre height. A is the foot-hole spacing across the motor, B along it, C from the shaft shoulder to the nearest foot holes.

FrameHABC
808012510050
90S9014010056
90L9014012556
100L10016014063
112M112190*14070
132S13221614089
132M13221617889
160M160254210108
160L160254254108
180M180279241121
180L180279279121
200L200318305133
225S225356286149
225M225356311149
250M250406349168
280S280457368190
280M280457419190
315S315508406216
315M315508457216
355L355610630254
400M400686630280

From the YE3/YE4 foot-mounted dimension table, catalog page 26. *Frame 112M: page 26 prints A = 180, the B35 table on page 28 prints 190. Confirm on the drawing. Catalog values in mm. Confirm every dimension on the drawing for your order before machining a base, flange or coupling.

Blue foot-mounted motor bolted to a steel baseplate, coupled to a centrifugal pump in a plant room

When B3 is the right choice

If the motor sits on a base and nothing bolts to its face, B3 is the simple answer.

01

Base-mounted drives

Motor and driven machine on one baseplate, joined by a coupling.

02

Belt drives

The motor stands on its feet and drives through pulleys.

03

Replacing an IEC foot motor

YE3 follows IEC 60072-1: shaft height and foot pattern match a standard frame such as 132M or 160L.

04

Large frames

B3 runs to frame 400. A flange-only B5 stops at 280.

A foot-mounted series to start from

Our general-purpose motors come foot-mounted as standard. YE3 is the IE3 choice.

Row of blue foot-mounted three-phase motors with cast feet on a concrete floor

IE3 · Drop-in IEC frame

YE3 Series

Premium-efficiency three-phase induction motor, built as a drop-in for standard IEC metric frames. Shaft heights, foot mounting patterns and flange dimensions follow IEC 60072-1, so the baseplate stays.

0.18–630 kW · Frames 80–400 · 2 to 10 poles · IE3 · IP55

Also foot-mounted: Y2 (IE2) and YE4 (IE4).

Where B3 motors go

Pumps and fans

Base-mounted pumps and fans driven through a coupling.

Compressors and machine tools

Machines with a motor on a base or a slide.

Conveyors

Conveyor drives on a frame or a baseplate.

Industry pages: Water and wastewater · HVAC and ventilation · Material handling

Ask for a B3 motor

Tell us the frame, or the motor it replaces.

  • Frame size, or kW and poles
  • Mounting: B3, or another foot position (B6, B7, B8, V5, V6)
  • Your existing foot dimensions if the base is already drilled
  • Supply voltage and frequency
  • Efficiency class: IE2, IE3 or IE4
  • Quantity
Request a quote

Jiangxi Jiawang Special Motor · +86 199 0684 4761 · [email protected] · 1-year warranty on all products

B3 questions

What does B3 mean?

B3 is the IM code for a foot-mounted motor with a horizontal shaft. The frame has feet for mounting on a baseplate or flat surface, and there is no flange.

Which frame sizes are available in B3?

Frames 80 to 400 in our catalog. The B3 table above lists H, A, B and C for each.

What is the difference between B3 and B35?

B35 adds a B5 flange at the drive end, so the motor can stand on its feet and bolt to the machine. See B35 motors.

Will a JWMotor B3 motor fit my existing baseplate?

If your current motor is a standard IEC frame, the YE3 lines up with the bolt-hole spacing and shaft centre height of that frame. Send the old nameplate and we confirm.

Can I mount a foot motor on a wall or ceiling?

The catalog lists B6, B7, B8, V5 and V6 foot positions for frames 80 to 160. Tell us the position when you order.