Three-phase induction motor with shaft, ribs and fan cowl

Asynchronous · IE2 to IE4

3 phase induction motor

Three-phase induction motors, IE2 to IE4. Y2, YE3 and YE4 are asynchronous. YE3 and YE4 follow IEC 60034-30-1.

Induction, then the IE class

The stator takes a three-phase supply. Rotor current is induced, so the motor is asynchronous. The published difference between the lines is the efficiency class.

Drive end, shaft and cooling ribs of an induction motor

Y2 · IE2

High starting torque, S1

The IE2 asynchronous line. Continuous duty for pumps, fans, blowers, compressors and conveyors. IEC frames 63–355.

YE3 · IE3

IEC 60034-30-1

Fewer losses than IE2. 100% copper windings, W470/W600 silicon steel, IP55. Frames such as 132M and 160L follow IEC 60072-1.

YE4 · IE4

Another 15–20% off IE3 losses

Also under IEC 60034-30-1. A balanced rotor and a redesigned fan cowl. Typically 10°C to 15°C cooler. Centre height and shaft diameter stay IEC. The body can be slightly longer and heavier.

Where each class is named

A blower is a Y2 duty. A mine conveyor is named on YE3. A mixer in a dry hall is named on YE4.

Induction motor driving an industrial blower

Y2 · IE2

Fans and blowers

Also pumps, compressors and conveyors. High starting torque, S1, frames 63–355.

Induction motor beside a dusty conveyor

YE3 · IE3

Mines and conveyors

Also compressors, plastics and general processing. IP55, 100% copper windings.

Induction motor driving a mixer in a dry hall

YE4 · IE4

Dry mixers

Also packaging, grain handling and ventilation. Lower losses when the hours are long.

Quote the induction class

Send the IE class with the plate. Mounting, voltage and frequency are on the customization page.

Request a quote
  • IE2, IE3 or IE4
  • kW, poles, voltage, frequency
  • Frame size and mounting
  • Hours per year, if the class is YE4

The class on the plate

What is a 3 phase induction motor here?

An asynchronous motor on a three-phase supply. The stator is fed from the supply and the rotor current is induced. The lines are Y2, YE3 and YE4. YE3 and YE4 are rated under IEC 60034-30-1.

How do IE2, IE3 and IE4 differ on these lines?

Y2 is IE2, with high starting torque on S1 duty. YE3 has fewer losses than IE2, with 100% copper windings and IP55. YE4 takes another 15–20% off IE3 losses and typically runs 10°C to 15°C cooler. YE4 is typically 15% to 30% more to buy. Electricity is over 95% of the lifecycle cost, and efficiency is another 1.5% to 3%. Above 6,000 hours a year, payback on the YE4 page is often 12 to 24 months.

Can the YE3 induction motor run from a frequency converter?

Yes. The YE3 page says it is compatible with a frequency converter. Cables over 50 m, or a voltage over 500 V, need a filter. YE4 can be slightly longer and heavier, so check the base before it replaces an IE2 or IE3 frame.

Articles