Stack of red flange-mounted motors on a pallet, flanges and shafts toward the camera

R · F · K · S reducers · RFKS motors · IE3

SEW compatible gear motors

The RFKS motor is made to fit the input of R, F, K and S gear reducers, the four main SEW-style platforms. Its shaft goes straight into the gearbox as the first-stage pinion, with no coupling and no flange adapter. The catalog runs 0.18–630 kW in IEC frames 80–400, to IE3.

R · F · K · SFour reducer families
0.18–630 kWPower in the catalog
80–400IEC frame, 2–10 poles
10–20%Shorter than motor plus adapter

What compatible means here

The catalog describes RFKS as optimized for reducer drives and fully compatible with SEW’s four major reducer platforms. The product page says the series follows international standard dimensions and can replace many SEW-style or Nord-style units. We confirm the fit for your gearbox before we quote.

The input fits

Custom shaft extension and end shield for direct insertion into the reducer input. The shaft becomes the first-stage pinion.

The oil stays in

An oil seal chamber in the end shield with high-temperature FKM (Viton) seals, including the vertical positions V1 and V3.

The efficiency is IE3

Premium efficiency to IEC 60034-30-1. On 4-pole models the catalog runs from 80.8% at 0.55 kW to 96.0% at 630 kW.

The layout fits

A modular design that allows flange, foot or shaft mounting, so the drive fits a cramped layout.

SEW and Nord are trademarks of their owners. JWMotor is not affiliated with them. “Compatible” describes the fit of the RFKS motor to these reducer types.

The four reducer families

The gearbox decides the output. The motor decides the power and speed going in. One RFKS range covers all four.

FamilyGear typeOutputWhat the product page says
RHelicalIn line with the motorPart of the modular R/F/K/S range
FParallel shaftParallel to the motor, offsetPart of the modular R/F/K/S range
KHelical-bevelRight angleHigher efficiency, up to 95% for the gearbox, and longer life for heavy duty
SHelical-wormRight angleMore cost-effective, with a self-locking feature for simple conveyors

The 95% figure is the efficiency of the K gearbox, not of the motor. Gearbox sizes and ratios are not listed on this page. They come from the gearbox you have.

Compact motor with ribbed aluminium housing bolted flush to a blue helical-bevel gearbox on a belt conveyor, no coupling

Direct mount, no adapter

A standard IEC motor on a reducer needs a lantern adapter and a coupling. RFKS removes both, and the drive gets shorter.

01

10–20% shorter

Against a standard motor plus flange adapter, the product page puts the axial length saving at 10–20%. That counts on AGVs, conveyor lines and packaging machines.

02

No coupling to misalign

With the shaft working as the first pinion, there is no coupling misalignment to cause vibration.

Replacing a motor on an existing reducer

Most requests are a failed motor on a gearbox that still runs. Four readings get the fit right.

03

Gearbox plate

Family (R, F, K or S), size and ratio. That fixes the input the motor has to match.

04

Motor plate

Kilowatts, poles, voltage and frequency, and the frame code if it is there.

05

Mounting position

Horizontal, or vertical V1 or V3. Vertical positions are where the oil seal matters most.

06

Duty

Heavy starts, long hours at low speed or frequent stops. The catalog upgrades windings and bearings for low-speed, high-torque duty.

The RFKS series

The motor behind this page. Full frame-by-frame data is on the series page.

Blue inline helical gear motor with the motor mated directly to the reducer, on a concrete plinth

Aluminum housing motor for gear reducers

RFKS Series Motors

Three-phase asynchronous motor for direct insertion into R, F, K and S gear reducers. Custom shaft extension, FKM oil seals in the end shield, rotor made for high starting torque. IE3 to IEC 60034-30-1.

0.18–630 kW · 2 · 4 · 6 · 8 · 10 poles · Frames 80–400 · IP55

Catalog performance is at 380 V, 50 Hz; the largest frame-400 ratings are listed at 660 V. Rated voltage on the product page is 220–690 V. Ambient −15 °C to +40 °C, altitude up to 1,000 m with a power derating above that. Class H insulation is available. Browse the gear motors category.

Where it goes

Lines and packaging

Automated lines, conveyors, AGVs and packaging machines, where a shorter drive frees space.

Heavy starts

Hoists and conveyors that start under load.

Farm and process

Grain handling, ventilation and feeding on the farm. Compressors, plastics and general processing in the plant.

Industry pages: Material handling · Agriculture · Manufacturing

Send the gearbox

The gearbox decides the input. Send it with the old motor, and the first quote can be the right one.

  • Gearbox family, size and ratio: R, F, K or S
  • Gearbox make, and a photo of both nameplates
  • Kilowatts and poles, or the old motor nameplate
  • Voltage and frequency
  • Mounting position, including vertical V1 or V3
  • Duty: heavy start, low speed, hours per day
Request a quote

Jiangxi Jiawang Special Motor · +86 199 0684 4761 · [email protected] · 1-year warranty on all products

Before the quote

What is an SEW compatible gear motor?

A motor made to fit the input of R (helical), F (parallel shaft), K (helical-bevel) and S (helical-worm) gear reducers, the four main SEW-style platforms. JWMotor’s is the RFKS series. Its shaft enters the gearbox as the first-stage pinion, so no coupling or adapter is needed.

Will it fit my existing gearbox?

The product page says RFKS follows international standard dimensions and can replace many SEW-style or Nord-style units. Send the gearbox family, size and ratio with the old motor nameplate, and we will confirm the fit before quoting.

Is JWMotor part of SEW?

No. JWMotor (Jiangxi Jiawang Special Motor) is an independent manufacturer. SEW and Nord are trademarks of their owners. “Compatible” refers to the fit of the RFKS motor to these reducer types.

K or S gearbox?

K (helical-bevel) gives higher efficiency, up to 95% for the gearbox, and longer life on heavy duty. S (helical-worm) costs less and is self-locking, which suits simple conveyors. The same RFKS motor range covers both.

What sizes are available?

0.18–630 kW in IEC frames 80–400, with 2, 4, 6, 8 and 10 poles. The per-frame table is on the R/F/K/S series page.

Will it leak oil in a vertical position?

The end shield has an oil seal chamber with high-temperature FKM (Viton) seals, aimed at seepage at the gearbox interface, including V1 and V3. Tell us the mounting position in the request.