IE4 · 0.75–630 kW · frames 80–400
YE4 series motors
Three-phase induction motors, IE4 super premium. 0.75–630 kW, poles 2, 4, 6, 8 and 10, IEC frames 80–400, 220–690 V.
The published range
These figures are the YE4 product range. The series page holds the model list.
01
IE4 super premium
Three-phase induction motor at IE4, to IEC 60034-30-1. Losses are an additional 15–20% lower than IE3. On continuous 24/7 duty, the page states electricity savings of over 15%.
02
EU rule for 75–200 kW
The published power range is 0.75–630 kW. YE4 meets EU Ecodesign Regulation (EU) 2019/1781 for motors from 75 kW to 200 kW.
03
10–15°C cooler
IE4 motors typically run 10°C to 15°C cooler than lower-efficiency models. A redesigned fan cowl and fan, with a dynamically balanced rotor, cut windage loss and keep high-power running quieter.
04
1,000 m, voltage within 5%
Stated altitude is 1,000 m. Voltage tolerance is within 5%. Above that altitude, derate. Class H is available for hotter rooms.
Centre height and shaft diameter stay on the IEC frame
Frames run from 80 to 400. Centre height and shaft diameter follow the IEC frame, so an IE2 or IE3 motor can be replaced without changing the baseplate, the coupling or the machine. Reaching IE4 can make the motor slightly longer and heavier. Check the clearance before it goes in.
- IEC centre height
- IEC shaft diameter
- Frames 80–400
- Check length and weight where the space is tight

YE4 series
One catalog line. The product page carries the model designation and the full grid.

IE4 · 0.75–630 kW
YE4
Poles 2, 4, 6, 8 and 10. IEC frames 80–400. Rated voltage 220–690 V.
Where the series is used
Grain handling, ventilation and feeding. Mixers, conveyors and packaging in dry factory areas. Compressors, plastics and general processing.
Farms
Grain handling, ventilation and feeding.
Dry factory lines
Mixers, conveyors and packaging.
Compressors
Compressors, plastics and general processing.
Quote from the model or the plate
Send the YE4 model if you have it. Otherwise send the nameplate of the motor being replaced, and the clearance around it.
- Frame, 80–400
- kW, 0.75–630
- Poles: 2, 4, 6, 8 or 10
- Voltage, 220–690 V, and frequency
- Mounting
- IE4
The motor may be slightly longer and heavier than the IE2 or IE3 it replaces. Regional voltage and mounting sit on customization. Send the plate through contact.
Questions before the order
What does the YE4 series cover?
Three-phase induction motors, IE4 super premium. Power 0.75–630 kW, poles 2, 4, 6, 8 and 10, IEC frames 80–400, rated voltage 220–690 V.
Will it fit the existing base?
Centre height and shaft diameter follow the IEC frame. The baseplate, coupling and machine stay when replacing an IE2 or IE3 motor. The YE4 can be slightly longer and heavier, so check the clearance. Frames run from 80 to 400.
What site conditions does the series page state?
Altitude up to 1,000 m, voltage within 5%. Higher altitude needs a power derating. Class H is available for hotter rooms. The motor typically runs 10°C to 15°C cooler than a lower-efficiency model. YE4 meets EU Ecodesign Regulation (EU) 2019/1781 for motors from 75 kW to 200 kW.
