WEG replacement IEC motor
WEG replacement IEC motor
Replacing a WEG motor means matching an IEC metric machine to the installed nameplate, not ordering WEG spare parts. Plates in this family are often W22 and related IEC TEFC frames. JW quotes Y2/YE3/YE4 (and YVF2/YEJ when the duty needs them) when kW, poles, frame, shaft and voltage line up.
Default starting point is YE3. W22 frames follow IEC 60072-1, but starting current and IE class on the plate still have to match the project.
How a drop-in is decided
- Read kW, V, Hz, poles or r/min, and frame from the plate—not the logo
- Confirm H, feet or flange (B3/B5/B35), shaft diameter and key
- Keep poles unless the driven machine is being re-specified
- Move to IE3 (YE3) only when the project allows it; stay IE2 (Y2) for a like-for-like spare
Which JW series to enquire
- YE3 (IE3) — usual quote when a general-purpose S1 machine can move to IE3 in the same IEC frame family.
- Y2 (IE2) — stay here if the spare must remain IE2 or the driven machine is lightly loaded.
- YVF2 — inverter / VFD supply; a standard TEFC is not automatically inverter-duty.
- YEJ — integral brake. R/F/K/S — helical gearmotor, not a bare motor.
When it will not drop in
- Same frame number, different shaft or key
- Flange-mounted machine vs a foot-mounted quote
- Geared unit vs a bare TEFC
- Brake, Ex, or marine nameplate treated as a general-purpose YE3
FAQ
Do you supply WEG spare parts or reverse-engineered windings?
No. JW quotes IEC metric machines (Y2 / YE3 / YE4 and specials). A replacement is decided from the nameplate and shaft/feet, not from the WEG badge.
If the plate shows W22 and related IEC TEFC frames, is YE3 a drop-in?
Often the shaft height follows IEC 60072-1, so the base may not need machining. You still match kW, poles, shaft diameter and key, voltage, and foot vs flange. W22 frames follow IEC 60072-1, but starting current and IE class on the plate still have to match the project.
When will it not drop in?
Different shaft Ø or key in the same frame number; B5 flange vs B3 feet; a gearmotor vs a bare TEFC; Ex / marine / brake nameplates; a pole count that would change pump or fan speed.
Should I upgrade to IE3?
Use YE3 when the spec or energy policy allows it. Keep Y2 when the site must stay IE2. Do not jump to IE4 only because a comparison page exists.
What should I photograph?
The nameplate (kW, V, Hz, poles or r/min, frame) plus a side shot of feet or flange and the shaft. That is how we stop quoting the wrong shaft in the same H.
Get a quote
Request a quote with rated kW, voltage, frequency, pole count, mounting (foot or flange), and whether you need a drop-in IEC replacement or a VFD-rated winding.
Request a quote