Three-phase · IE2 to IE4
Induction electric motors
Three-phase induction electric motors. The stator field induces the rotor current. Y2, YE3 and YE4, IE2 to IE4.
Induced in the rotor
The stator takes a three-phase supply. That field induces the rotor current. Y2, YE3 and YE4 are the induction lines.

01 · The stator field
Rotor current is induced
The three-phase supply feeds the stator. The rotor current comes from that field. On this page the machines are Y2, YE3 and YE4.
02 · Y2 · IE2
High starting torque, S1
Continuous duty for pumps, fans, blowers, compressors and conveyors. IEC frames 63–355.
03 · YE3 and YE4
Fewer losses on the same duty
YE3 follows IEC 60034-30-1, with fewer losses than IE2, 100% copper windings and IP55. It runs from a frequency converter. Cables over 50 m, or a voltage over 500 V, need a filter. YE4 takes another 15–20% off IE3 losses and typically runs 10°C to 15°C cooler. Centre height and shaft diameter stay IEC. The body can be slightly longer and heavier.
Three induction lines
Each card opens the series page. The induced-rotor construction is the same class. The efficiency class stays with the line that publishes it.

IE2 · S1
Y2
High starting torque. Pumps, fans, blowers, compressors and conveyors. Frames 63–355.

IE3 · IEC 60034-30-1
YE3
Fewer losses than IE2. 100% copper windings, IP55. Mines, conveyors, compressors and plastics.

IE4 · IEC 60034-30-1
YE4
15–20% lower losses than IE3. Ventilation, grain and dry packaging. Check length and weight.
The load on the shaft
A fan is a Y2 duty. Plastics and general processing are named on YE3. Packaging in a dry hall is named on YE4.
Y2 · IE2
Fans and blowers
Also pumps, compressors and conveyors. High starting torque, S1, frames 63–355.
YE3 · IE3
Plastics and processing
Also mines, conveyors and compressors. IP55, 100% copper windings, W470/W600 silicon steel.
YE4 · IE4
Dry packaging
Also grain handling, ventilation and mixers. Above 6,000 hours a year, the YE4 page puts payback at 12 to 24 months.
Quote the induction line
Send the duty with the plate. Mounting and the regional grid are on the customization page.
Request a quote- kW and the duty
- Poles, voltage, frequency
- Frame and mounting
- IE2, IE3 or IE4
The current, then the line
What is an induction electric motor here?
A three-phase motor whose rotor current is induced by the stator field. The lines are Y2, YE3 and YE4, from IE2 to IE4. YE3 and YE4 are rated under IEC 60034-30-1.
Which line carries the load?
Y2 is IE2, with high starting torque on S1 duty, frames 63–355, for pumps, fans, blowers, compressors and conveyors. YE3 has fewer losses than IE2, with 100% copper windings, W470/W600 silicon steel and IP55, for mines, conveyors, compressors and plastics. Frames such as 132M and 160L follow IEC 60072-1. YE4 takes another 15–20% off IE3 losses and typically runs 10°C to 15°C cooler. It is typically 15% to 30% more to buy. Electricity is over 95% of the lifecycle cost, and efficiency is another 1.5% to 3%. Above 6,000 hours a year, payback on the YE4 page is often 12 to 24 months.
Can the YE3 induction motor run from a frequency converter?
Yes. Class F insulation is assessed at a Class B rise, and the YE3 page says it is compatible with a frequency converter. Cables over 50 m, or a voltage over 500 V, need a filter. YE4 can be slightly longer and heavier, so check the base before it replaces an IE2 or IE3 frame.

