Three-phase motor with a fan cowl on a steel base

YE4 · IE4 · Super premium

IE4 motors

IE4 motors from the YE4 series. Super premium efficiency to IEC 60034-30-1, with losses 15–20% lower than IE3.

The IE4 line

YE4 is the super-premium three-phase induction motor. The class is IE4, to IEC 60034-30-1.

01

Losses 15–20% lower than IE3

The series cuts energy losses by an additional 15–20% compared with IE3. On continuous 24/7 duty, the page states electricity savings of over 15%.

02

EU rule for 75–200 kW

YE4 meets EU Ecodesign Regulation (EU) 2019/1781 for motors from 75 kW to 200 kW.

03

10–15°C cooler

IE4 motors typically run 10°C to 15°C cooler than lower-efficiency models. A redesigned fan cowl and fan, with a dynamically balanced rotor, cut windage loss and keep high-power running quieter. Lower temperature slows aging of the insulation and the bearing grease.

04

Hot rooms and altitude

Class H insulation is available for high-temperature rooms. High altitude needs a power derating.

Centre height and shaft diameter stay on the IEC frame

The series keeps IEC centre height and shaft diameter, so an IE2 or IE3 motor can be replaced without changing the baseplate, the coupling or the machine. Reaching IE4 can make the motor slightly longer and heavier. Check the clearance before it goes in.

  • IEC centre height
  • IEC shaft diameter
  • Check length and weight where the space is tight
Shaft keyway and foot of an industrial motor

YE4 series

One catalog line. The product page carries the model designation and the grid.

YE4 motor

IE4 · Super premium

YE4

Losses 15–20% lower than IE3. IEC centre height and shaft diameter. The model list is on the series page.

Where YE4 is used

Grain handling, ventilation and feeding. Mixers, conveyors and packaging in dry factory areas. Compressors, plastics and general processing.

Industrial motor coupled to a grain elevator

Farms

Grain handling, ventilation and feeding.

Industrial motor coupled through a gearbox to a conveyor

Dry factory lines

Mixers, conveyors and packaging.

Industrial motor coupled to an air compressor

Compressors

Compressors, plastics and general processing.

Quote from the nameplate

Send the plate of the motor on the base, and the clearance around it.

  • Frame, centre height and shaft
  • kW
  • Voltage and frequency
  • Poles
  • Mounting
  • IE4

The motor may be slightly longer and heavier than the IE2 or IE3 it replaces. Class H is available for hotter rooms. High altitude needs a power derating. Mounting and regional supply sit on customization. Send the plate through contact.

Questions before the order

What is an IE4 motor here?

YE4. A super-premium three-phase induction motor to IEC 60034-30-1. Losses are an additional 15–20% lower than IE3. The series meets EU Ecodesign Regulation (EU) 2019/1781 for motors from 75 kW to 200 kW.

What does the series page say about cost?

The purchase price is typically 15% to 30% higher than IE3. Electricity is over 95% of the lifecycle cost. Efficiency is an additional 1.5% to 3% higher. On high-load duty above 6,000 hours a year, the page says the price difference is often recovered in 12 to 24 months.

Will it fit the existing base?

Centre height and shaft diameter follow the IEC frame, so the baseplate, coupling and machine stay. The motor can be slightly longer and heavier, so check the clearance. It typically runs 10°C to 15°C cooler than a lower-efficiency motor.