Three-phase motor with a fan cowl on a steel base

IE4 · 0.75–630 kW · frames 80–400

YE4 series motors

Three-phase induction motors, IE4 super premium. 0.75–630 kW, poles 2, 4, 6, 8 and 10, IEC frames 80–400, 220–690 V.

The published range

These figures are the YE4 product range. The series page holds the model list.

0.75–630 kWPower
2 · 4 · 6 · 8 · 10Poles
80–400IEC frame
220–690 VRated voltage

01

IE4 super premium

Three-phase induction motor at IE4, to IEC 60034-30-1. Losses are an additional 15–20% lower than IE3. On continuous 24/7 duty, the page states electricity savings of over 15%.

02

EU rule for 75–200 kW

The published power range is 0.75–630 kW. YE4 meets EU Ecodesign Regulation (EU) 2019/1781 for motors from 75 kW to 200 kW.

03

10–15°C cooler

IE4 motors typically run 10°C to 15°C cooler than lower-efficiency models. A redesigned fan cowl and fan, with a dynamically balanced rotor, cut windage loss and keep high-power running quieter.

04

1,000 m, voltage within 5%

Stated altitude is 1,000 m. Voltage tolerance is within 5%. Above that altitude, derate. Class H is available for hotter rooms.

Centre height and shaft diameter stay on the IEC frame

Frames run from 80 to 400. Centre height and shaft diameter follow the IEC frame, so an IE2 or IE3 motor can be replaced without changing the baseplate, the coupling or the machine. Reaching IE4 can make the motor slightly longer and heavier. Check the clearance before it goes in.

  • IEC centre height
  • IEC shaft diameter
  • Frames 80–400
  • Check length and weight where the space is tight
Shaft keyway and foot of an industrial motor

YE4 series

One catalog line. The product page carries the model designation and the full grid.

YE4 motor

IE4 · 0.75–630 kW

YE4

Poles 2, 4, 6, 8 and 10. IEC frames 80–400. Rated voltage 220–690 V.

Where the series is used

Grain handling, ventilation and feeding. Mixers, conveyors and packaging in dry factory areas. Compressors, plastics and general processing.

Industrial motor coupled to a grain elevator

Farms

Grain handling, ventilation and feeding.

Industrial motor coupled through a gearbox to a conveyor

Dry factory lines

Mixers, conveyors and packaging.

Industrial motor coupled to an air compressor

Compressors

Compressors, plastics and general processing.

Quote from the model or the plate

Send the YE4 model if you have it. Otherwise send the nameplate of the motor being replaced, and the clearance around it.

  • Frame, 80–400
  • kW, 0.75–630
  • Poles: 2, 4, 6, 8 or 10
  • Voltage, 220–690 V, and frequency
  • Mounting
  • IE4

The motor may be slightly longer and heavier than the IE2 or IE3 it replaces. Regional voltage and mounting sit on customization. Send the plate through contact.

Questions before the order

What does the YE4 series cover?

Three-phase induction motors, IE4 super premium. Power 0.75–630 kW, poles 2, 4, 6, 8 and 10, IEC frames 80–400, rated voltage 220–690 V.

Will it fit the existing base?

Centre height and shaft diameter follow the IEC frame. The baseplate, coupling and machine stay when replacing an IE2 or IE3 motor. The YE4 can be slightly longer and heavier, so check the clearance. Frames run from 80 to 400.

What site conditions does the series page state?

Altitude up to 1,000 m, voltage within 5%. Higher altitude needs a power derating. Class H is available for hotter rooms. The motor typically runs 10°C to 15°C cooler than a lower-efficiency model. YE4 meets EU Ecodesign Regulation (EU) 2019/1781 for motors from 75 kW to 200 kW.