Cast-iron motor on a steel base in a factory

YE3 · IE3

Premium efficiency motors

YE3 premium efficiency motors, IE3. Fewer losses than IE2. First cost may be slightly higher. Lower power use lowers the cost of ownership.

Why buyers specify YE3

The product page names YE3 a premium-efficiency three-phase induction motor, at IE3.

Cooling ribs and closed terminal box of a cast-iron motor

01

Fewer losses than IE2

Less loss when electrical energy becomes shaft power, from the materials and the design. Those materials are W470/W600 cold-rolled silicon steel and 100% copper windings.

02

First cost and running cost

The first cost may be slightly higher. Lower power use lowers the cost of ownership.

03

The base stays

Shaft centre height, foot pattern and flange follow IEC 60072-1. A standard frame such as 132M or 160L keeps the existing base and coupling. The series meets MEPS in the EU, South America and Asia.

Duties on the series page

Mines, conveyors, compressors, plastics and general processing.

Cast-iron motor coupled to a mill drive in a dusty plant

Mines

Cast iron, for high torque and dust.

Cast-iron motor coupled through a gearbox to a conveyor

Conveyors

Three-phase conveyor drives.

Cast-iron motor coupled to an air compressor

Compressors

Compressors, plastics and general processing.

Send the nameplate

The quote starts from the motor on the base, or from the frame that has to match.

  • Frame, such as 132M or 160L
  • kW
  • Voltage and frequency
  • Poles
  • Foot or flange mounting
  • IE3

YE3 can run on a frequency converter. Cables over 50 m, or voltage over 500 V, need a filter. Class H is available for hotter rooms. High altitude needs a power derating. Mounting and regional supply sit on customization. Send the plate through contact.

Before you send the plate

What is a premium efficiency motor here?

YE3. An IE3 premium-efficiency three-phase induction motor. The series page states fewer losses than an IE2 motor, through the materials and the design: W470/W600 cold-rolled silicon steel and 100% copper windings.

What does the series page say about cost?

The first cost may be slightly higher. Lower power use lowers the cost of ownership.

Will a standard IEC frame match?

Shaft centre height, foot pattern and flange follow IEC 60072-1. Frames such as 132M and 160L line up with the existing bolt spacing. The series page names Siemens, ABB and WEG IE1 motors when that frame is standard. IP55 is standard. Class F insulation is assessed at a Class B rise of 80K.