Cast-iron motor on a steel base in a factory

YE3 · IE3 · Premium efficiency

IE3 motors

IE3 motors from the YE3 series. Premium efficiency to IEC 60034-30-1, IP55, and an IEC frame drop-in for conveyors, compressors and processing.

The IE3 line

YE3 is the premium-efficiency three-phase induction motor. The class is IE3, to IEC 60034-30-1.

01

IE3 premium efficiency

Fewer losses than an IE2 motor, from the materials and the design. The series meets MEPS in the EU, South America and Asia.

02

IP55

IP55 protection is standard on the YE3 series.

03

W470/W600 and copper

W470/W600 cold-rolled silicon steel and 100% copper windings.

04

Class F at a Class B rise

Class F insulation, 155°C, assessed at a Class B rise of 80K. That reserve covers the voltage spikes of a frequency converter. Class H is available for hotter rooms. High altitude needs a power derating.

Same shaft height on the existing base

Shaft centre height, foot pattern and flange follow IEC 60072-1. The base and the coupling stay when the frame is a standard IEC frame.

  • IEC 60072-1 shaft height, feet and flange
  • Frames such as 132M and 160L
  • Siemens, ABB and WEG IE1 motors on a standard IEC frame
Shaft keyway and cast foot of an industrial motor

Where YE3 is used

The series page names mines, conveyors, compressors, plastics and general processing.

Cast-iron motor coupled to a mill drive in a dusty plant

Mines

Cast iron, for high torque and dust.

Cast-iron motor coupled through a gearbox to a conveyor

Conveyors

Three-phase conveyor drives.

Cast-iron motor coupled to an air compressor

Compressors

Compressors, plastics and general processing.

Quote from the nameplate

Send the frame you need to match, or the plate of the motor on the base.

  • Frame, such as 132M or 160L
  • kW
  • Voltage and frequency
  • Poles
  • Foot or flange mounting
  • IE3

YE3 can run on a frequency converter. Cables over 50 m, or voltage over 500 V, need a filter. Mounting and regional supply sit on customization. Send the plate through contact.

Questions before the order

What is an IE3 motor here?

YE3. A premium-efficiency three-phase induction motor to IEC 60034-30-1, with IP55, W470/W600 silicon steel and 100% copper windings. The series page states fewer losses than an IE2 motor, through the materials and the design. It meets MEPS in the EU, South America and Asia.

Will it fit the existing base?

YE3 follows IEC 60072-1 for shaft centre height, foot pattern and flange. A standard IEC frame such as 132M or 160L lines up with the bolt spacing. The series page names Siemens, ABB and WEG IE1 motors when that frame is standard.

What site conditions does the series page state?

IP55. Class F insulation at 155°C, assessed at a Class B rise of 80K. Class H is available for hotter rooms. High altitude needs a power derating. A frequency converter is acceptable. Cables over 50 m, or voltage over 500 V, need a filter. The same cast-iron housing is used for high torque and dust in mines.