Cast-iron TEFC motor on a steel base in a factory

IE2 · TEFC · frames 63–355

Y2 series motors

Three-phase induction motors, 0.18–315 kW, poles 2, 4 and 6. Cast-iron TEFC, IP55, IEC frames 63–355.

The published range

These figures are the Y2 product range. The series page holds the model list.

0.18–315 kWPower
2 · 4 · 6Poles
63–355IEC frame
220–690 VRated voltage

01

IE2, high starting torque

Three-phase asynchronous motor at IE2 high efficiency, with high starting torque, for S1 continuous duty.

02

TEFC, IC411, IP55

Totally enclosed fan-cooled. Dust protection, and low-pressure water jets from any direction.

03

HT200 frame and end shields

Cast iron for vibration damping and shock. Built to IEC 60034, IEC 60072-1 and DIN 42673.

04

40°C, 1,000 m

Class F insulation, tested for a Class B rise, ambient up to 40°C. Stated altitude is 1,000 m, with voltage held within 5%. Above that altitude, derate. Class H is available for hotter rooms.

Same shaft height as the motor it replaces

Foot pattern and flange follow the IEC frame, so the base and the coupling stay. The series is the drop-in for these machines.

  • Older Y-series motors
  • Siemens 1LA7 and 1LG4
  • ABB M2BA
  • Frames 63–355
Shaft keyway and cast foot of a TEFC motor

Where the series is used

S1 pumps, fans, blowers, compressors and conveyors. The same page names crushers, ball mills and heavy-duty compressors, and rooms in mining, agriculture and manufacturing.

Cast-iron motor coupled to a centrifugal pump

Pumps

Continuous-duty pumps, including backup pumps.

Cast-iron motor coupled to a centrifugal blower

Fans and blowers

Industrial fans, blowers and auxiliary fans.

Cast-iron motor coupled through a gearbox to a conveyor

Conveyors

Three-phase conveyor drives.

Quote from the model or the plate

Send the Y2 model if you have it. Otherwise send the nameplate of the motor being replaced.

  • Frame, 63–355
  • kW, 0.18–315
  • Poles: 2, 4 or 6
  • Voltage, 220–690 V, and frequency
  • Foot or flange mounting
  • IE2

Regional voltage and mounting sit on customization. Send the plate through contact.

Questions before the order

What does the Y2 series cover?

Three-phase induction motors, IE2, cast-iron TEFC and IP55. Power 0.18–315 kW, poles 2, 4 and 6, IEC frames 63–355, rated voltage 220–690 V. High starting torque on S1 duty.

Will it fit the existing base?

Y2 follows IEC 60034, IEC 60072-1 and DIN 42673. Shaft centre height, foot pattern and flange match the IEC frame. The series page names older Y-series motors, Siemens 1LA7 and 1LG4, and ABB M2BA.

What site conditions does the series page state?

IP55 against dust and low-pressure water jets. Class F insulation tested for a Class B rise, ambient up to 40°C. Altitude up to 1,000 m, voltage within 5%. Higher altitude needs a power derating. Class H is available for hotter rooms. The same housing is used in mining, agriculture and manufacturing.