Y2 IE2 · YE3 IE3
High efficiency electric motors
Y2 is the IE2 high-efficiency line. YE3 is IE3 premium efficiency to IEC 60034-30-1, with fewer losses than IE2.
Two classes, two series
Both are three-phase asynchronous motors for general machinery. The efficiency class on the nameplate picks the series.

Y2 · IE2
IE2 high efficiency with high starting torque, for S1 duty. HT200 cast-iron frame and end shields, TEFC / IC411, IP55. IEC frames 63–355, built to IEC 60034, IEC 60072-1 and DIN 42673. Drop-in for older Y-series motors, Siemens 1LA7 and 1LG4, and ABB M2BA.
YE3 · IE3
IE3 premium efficiency to IEC 60034-30-1. Fewer losses than IE2, from the materials and the design: W470/W600 silicon steel and 100% copper windings. IP55. Class F insulation at 155°C, assessed at a Class B rise of 80K. Shaft height, feet and flange follow IEC 60072-1, including frames such as 132M and 160L.
The two series
Each series page holds its own model decode and kW grid.

IE2 high efficiency
Y2
Cast-iron TEFC motor for S1 pumps, fans, compressors and conveyors. Frames 63–355. Class F insulation tested for a Class B rise, ambient up to 40°C.

IE3 premium efficiency
YE3
Meets MEPS in the EU, South America and Asia. IP55, copper windings, and a drop-in IEC frame for mines, conveyors, compressors, plastics and general processing.
Where each line is named
Pumps sit on the Y2 page. Compressors, plastics and general processing sit on the YE3 page. Both pages name conveyors.
Pumps
Y2, continuous duty, including backup pumps.
Conveyors
Three-phase conveyor drives on the Y2 page and the YE3 page.
Processing
YE3 for compressors, plastics and general processing.
Quote the class on the plate
Send the efficiency class with the rest of the nameplate. Both series offer Class H for hotter rooms, and both need a power derating at high altitude.
- IE2 or IE3
- Frame
- kW
- Voltage and frequency
- Poles
- Mounting
YE3 can run on a frequency converter. Cables over 50 m, or voltage over 500 V, need a filter. Mounting and regional supply sit on customization.
Questions before the order
Which series is the high-efficiency motor?
Y2 is IE2 high efficiency: cast iron, TEFC, IP55, frames 63–355, high starting torque on S1 duty. YE3 is IE3 premium efficiency to IEC 60034-30-1, with fewer losses than an IE2 motor.
What changes from IE2 to IE3?
The YE3 page states fewer losses when electrical energy becomes mechanical energy, through better materials and an optimized design. The first cost may be slightly higher. Lower energy use reduces the cost of running the motor. YE3 uses W470/W600 silicon steel and 100% copper windings, and meets MEPS in the EU, South America and Asia.
Will the frame match the motor already on the base?
Y2 follows IEC 60034, IEC 60072-1 and DIN 42673, frames 63–355, including Siemens 1LA7 and 1LG4 and ABB M2BA. YE3 follows IEC 60072-1 for shaft height, feet and flange. A standard IEC frame such as 132M or 160L lines up with the existing bolt pattern. YE3 also names Siemens, ABB and WEG IE1 motors when that frame is standard.
