Y2 · IE2 · IEC frames 63–355
IE2 motors
The Y2 series is the IE2 line. Cast-iron TEFC motors on IEC frames 63–355, with high starting torque for S1 pumps, fans and conveyors.
The IE2 line
Y2 is a three-phase asynchronous motor built to IE2 high efficiency, for continuous duty and for projects that buy on first cost as well as frame fit.
01
IE2, high starting torque
The series pairs IE2 high efficiency with a high starting torque design. Duty is S1. It is the general-purpose line for machinery that runs continuously, and for MRO stock.
02
TEFC, IC411, IP55
Totally enclosed fan-cooled. The fan moves air over the outside of the frame. IP55 covers dust and low-pressure water jets from any direction.
03
HT200, frames 63–355
HT200 cast iron for the frame and the end shields, for vibration damping and shock. IEC metric frames run from 63 to 355.
04
Class F at a Class B rise
Class F insulation, tested for a Class B temperature rise, at ambient temperatures up to 40°C. Class H is available for hotter rooms. High altitude needs a power derating.
Same frame as the motor it replaces
Y2 follows IEC 60034, IEC 60072-1 and DIN 42673. Shaft centre height, foot pattern and flange match a standard IEC frame, so the base and the coupling stay.
- IEC frames 63–355
- Older Y-series motors
- Siemens 1LA7 and 1LG4
- ABB M2BA

Y2 series
One series carries the IE2 nameplate. The series page holds the model decode.

IE2 · TEFC · IC411 · IP55
Y2
Cast-iron three-phase asynchronous motor. HT200 frame and end shields, IEC frames 63–355, high starting torque on S1 duty. Field-serviceable, without a special tool kit.
Where Y2 is applied
Pumps, fans, compressors and conveyors on S1 duty. The same page names crushers, ball mills and heavy-duty compressors, and rooms in mining, agriculture and manufacturing.
Pumps
Continuous-duty pumps, including backup pumps.
Fans and blowers
Industrial fans, blowers and auxiliary fans.
Conveyors
Three-phase conveyor drives.
Quote from the nameplate
The kW grid stays on the Y2 series page. A factory quote starts from the plate on the motor being replaced, or from the machine the OEM is building.
- Frame, 63–355
- kW
- Voltage and frequency
- Poles
- Mounting
- IE2
Mounting and regional voltage sit on customization. Send the plate through contact.
Questions before the order
What is the IE2 motor in this catalog?
Y2. It is a three-phase asynchronous motor at IE2 high efficiency, with high starting torque, for S1 continuous duty. The housing is HT200 cast iron. Frames run from 63 to 355.
Will it fit the existing base?
Y2 is built to IEC 60034, IEC 60072-1 and DIN 42673. Shaft centre height, foot pattern and flange follow the IEC frame. The series page names drop-in use for older Y-series motors, Siemens 1LA7 and 1LG4, and ABB M2BA.
What protection and temperature does Y2 publish?
TEFC / IC411 and IP55: dust, and low-pressure water jets from any direction. Insulation is Class F, tested for a Class B temperature rise, at ambient temperatures up to 40°C. Class H is optional. High altitude needs a power derating.
