Three-phase induction electric motor with shaft, ribs and fan cowl

Three-phase · IE2 to IE4

Induction electric motors

Three-phase induction electric motors. The stator field induces the rotor current. Y2, YE3 and YE4, IE2 to IE4.

Induced in the rotor

The stator takes a three-phase supply. That field induces the rotor current. Y2, YE3 and YE4 are the induction lines.

Cooling ribs and terminal box on an induction electric motor

01 · The stator field

Rotor current is induced

The three-phase supply feeds the stator. The rotor current comes from that field. On this page the machines are Y2, YE3 and YE4.

02 · Y2 · IE2

High starting torque, S1

Continuous duty for pumps, fans, blowers, compressors and conveyors. IEC frames 63–355.

03 · YE3 and YE4

Fewer losses on the same duty

YE3 follows IEC 60034-30-1, with fewer losses than IE2, 100% copper windings and IP55. It runs from a frequency converter. Cables over 50 m, or a voltage over 500 V, need a filter. YE4 takes another 15–20% off IE3 losses and typically runs 10°C to 15°C cooler. Centre height and shaft diameter stay IEC. The body can be slightly longer and heavier.

The load on the shaft

A fan is a Y2 duty. Plastics and general processing are named on YE3. Packaging in a dry hall is named on YE4.

Induction electric motor driving an industrial fan

Y2 · IE2

Fans and blowers

Also pumps, compressors and conveyors. High starting torque, S1, frames 63–355.

Induction electric motor in a plastics processing hall

YE3 · IE3

Plastics and processing

Also mines, conveyors and compressors. IP55, 100% copper windings, W470/W600 silicon steel.

Induction electric motor beside a dry packaging line

YE4 · IE4

Dry packaging

Also grain handling, ventilation and mixers. Above 6,000 hours a year, the YE4 page puts payback at 12 to 24 months.

Quote the induction line

Send the duty with the plate. Mounting and the regional grid are on the customization page.

Request a quote
  • kW and the duty
  • Poles, voltage, frequency
  • Frame and mounting
  • IE2, IE3 or IE4

The current, then the line

What is an induction electric motor here?

A three-phase motor whose rotor current is induced by the stator field. The lines are Y2, YE3 and YE4, from IE2 to IE4. YE3 and YE4 are rated under IEC 60034-30-1.

Which line carries the load?

Y2 is IE2, with high starting torque on S1 duty, frames 63–355, for pumps, fans, blowers, compressors and conveyors. YE3 has fewer losses than IE2, with 100% copper windings, W470/W600 silicon steel and IP55, for mines, conveyors, compressors and plastics. Frames such as 132M and 160L follow IEC 60072-1. YE4 takes another 15–20% off IE3 losses and typically runs 10°C to 15°C cooler. It is typically 15% to 30% more to buy. Electricity is over 95% of the lifecycle cost, and efficiency is another 1.5% to 3%. Above 6,000 hours a year, payback on the YE4 page is often 12 to 24 months.

Can the YE3 induction motor run from a frequency converter?

Yes. Class F insulation is assessed at a Class B rise, and the YE3 page says it is compatible with a frequency converter. Cables over 50 m, or a voltage over 500 V, need a filter. YE4 can be slightly longer and heavier, so check the base before it replaces an IE2 or IE3 frame.

Articles