Three-phase · IE2 to IE4
Asynchronous motors
Three-phase asynchronous motors, IE2 to IE4. Pole count and supply frequency set the speed band.
The speed band
Y2, YE3 and YE4 are asynchronous. The stator takes a three-phase supply and the rotor current is induced. The speed band follows the pole count and the supply frequency.

01 · Poles and frequency
Send both with the quote
They set the speed band. Voltage and frequency for the regional grid are set on the customization page, with mounting B3, B5, B35 or V1.
02 · Y2 on S1
Continuous duty at that band
The IE2 asynchronous line. High starting torque, S1, IEC frames 63–355. Named for pumps, fans, blowers, compressors and conveyors.
03 · When frequency moves
YE3 on a converter, YE4 on long hours
YE3 is compatible with a frequency converter, so the supply frequency follows the drive. Cables over 50 m, or a voltage over 500 V, need a filter. YE4 is asynchronous at IE4: losses another 15–20% below IE3, typically 10°C to 15°C cooler. Centre height and shaft diameter stay IEC. The body can be slightly longer and heavier.
Three asynchronous lines
Same speed rule on each card. The series page carries the efficiency class and the frame notes.

IE2 · S1
Y2
Asynchronous, high starting torque, continuous duty. Frames 63–355. Pumps, fans, blowers, compressors and conveyors.

IE3 · IEC 60034-30-1
YE3
Fewer losses than IE2. 100% copper windings, IP55. A frequency converter changes the supply frequency. Mines, conveyors, compressors and plastics.

IE4 · IEC 60034-30-1
YE4
Asynchronous, 15–20% lower losses than IE3. Ventilation, grain and dry mixers. Check length and weight.
Speed on the duty
A conveyor that stays at one speed is a Y2 duty. A compressor on a converter is named on YE3. Ventilation that runs many hours is named on YE4.
Y2 · IE2
Conveyors on S1
Also pumps, fans, blowers and compressors. High starting torque, frames 63–355, at the stated poles and frequency.
YE3 · IE3
Compressors
Also mines, conveyors and plastics. Compatible with a frequency converter. Cables over 50 m, or voltage over 500 V, need a filter.
YE4 · IE4
Ventilation
Also grain handling, dry mixers and packaging. Above 6,000 hours a year, the YE4 page puts payback at 12 to 24 months.
Quote the speed band
Pole count and supply frequency come first. Mounting and the regional grid are on the customization page.
Request a quote- Pole count
- Supply frequency
- kW and voltage
- Frame, mounting, and the IE class
Poles, frequency, line
What does asynchronous mean on this page?
Y2, YE3 and YE4 on a three-phase supply. The stator is fed from the supply and the rotor current is induced. Pole count and supply frequency set the speed band.
What do I send so the speed band is right?
Pole count, supply frequency, kW, voltage and the frame. Y2 frames are 63–355. YE4 keeps the IEC centre height and shaft diameter and can be slightly longer and heavier, so check the base. Mounting is B3, B5, B35 or V1, and regional voltage or frequency is set on the customization page.
Can YE3 change speed from a frequency converter?
Yes. The YE3 page says it is compatible with a frequency converter, so the supply frequency follows the drive. Cables over 50 m, or a voltage over 500 V, need a filter.
